To Verify Proper Installation (Oracle x86 Systems)

1. During system power-on initiation, the following system booting BIOS initialization screen is displayed.

   QLogic Corporation
   QEM8152 PCI3.0 Fibre Channel ROM BIOS version 2.14
   Copyright (c) QLogic Corporation 1992-2009. All rights reserved.
   www.qlogic.com
    
   Press <CTRL-Q> or <ALT-Q> for Fast!UTIL
   BIOS for Adapter 0 is disabled
   BIOS for Adapter 1 is disabled
   ROM BIOS NOT INSTALLED
    
   

2. Immediately press Ctrl-Q.

   The following QLogic Fast!UTIL menu is displayed.

   QLogic Corporation
   QEM8152 PCI3.0 Fibre Channel ROM BIOS version 2.14
   Copyright (c) QLogic Corporation 1993-2009. All rights reserved.
   www.qlogic.com
    
   Press <CTRL-Q> or <ALT-Q> for Fast!UTIL
    
   BIOS for Adapter 0 is disabled
    
   BIOS for Adapter 1 is disabled
   ROM BIOS NOT INSTALLED
    
   <CTRL-Q> Detected, Initialization in progress, Please wait...
   

   Then the following QLogic Fast!UTIL menu is displayed.

                       QLogic Fast!UTIL
                      Select Host Adapter
   ----------------------------------------------------------
   Adapter Type     Address   Slot   Bus   Device   Function
    
   QEM8152          E800      01     05    00       2
   QEM8152          EC00      01     05    00       3
   

3. Use the Arrow key to highlight the Converged Network Adapter port that has connected devices and press Enter.

   The QLogic Fast!UTIL menu is displayed as shown in the following example.

                      QLogic Fast!UTIL
                      Selected Adapter
   ----------------------------------------------------------
   Adapter Type     Address   Slot   Bus   Device   Function
   QEM8152          E800      01     05    00       2
    
   ----------------------------------------------------------
      Fast!UTIL Options
    
                           Configuration Settings
                           Scan Fibre Devices
                           Fibre Disk Utility
                           Loopback Data Test
                           Select Host Adapter
                           Exit Fast!UTIL
   

4. Use the Arrow key to highlight Scan Fibre Devices and press Enter.

   The following example shows two RAID devices attached to one port of a dual-port Converged Network Adapter.

                         QLogic Fast!UTIL
    
                    Select Fibre Channel Device
    
   ID  Vendor  Product           Rev    Port Name        Port ID
    
   0   SUN      CSM200_R         0619 
   1   SUN      CSM200_R         0619 
   2   No device present
   3   No device present
   4   No device present
   5   No device present
   6   No device present
   7   No device present
   8   No device present
   9   No device present
   10  No device present
   11  No device present
   12  No device present
   13  No device present
   14  No device present
   15  No device present
   

5. To exit the QLogic Fast!UTIL, press the Escape key.

   The following QLogic Fast!UTIL menu is displayed.

                      QLogic Fast!UTIL
                      Selected Adapter
    
   ----------------------------------------------------------
   Adapter Type     Address   Slot   Bus   Device   Function
   QEM8152          E800      01     05    00       2
    
   ----------------------------------------------------------
      Fast!UTIL Options
    
                           Configuration Settings
                           Scan Fibre Devices
                           Fibre Disk Utility
                           Loopback Data Test
                           Select Host Adapter
                           Exit Fast!UTIL
   

6. Highlight Exit Fast!UTIL and press Enter.

   The following QLogic Fast!UTIL menu is displayed.

                      QLogic Fast!UTIL
    
   Exit Fast!UTIL
   ----------------------------------
    
                           Reboot System
                           Return to Fast!UTIL
   

   ---

   Note - If the QLogic BIOS or PXE banner does not display during POST, confirm that the EM FUNC OPTION ROM is enabled in the system BIOS.

   ---