Go to main content
oracle home
Sun Storage 10 GbE FCoE ExpressModule Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-EMFCOE2-Q-SR, SG-XEMFCOE2-Q-SR, SG-EMFCOE2-Q-TA, SG-XEMFCOE2-Q-TA, and 7101682
Exit Print View
Search Term
Search Scope:
This Document
Entire Library
» ...
Documentation Home
»
Sun Storage 10 GbE FCoE ExpressModule ...
»
Sun Storage 10 GbE FCoE ExpressModule ...
»
Hardware Installation and Removal
»
Removing the Hardware
»
To Remove the Adapter
Updated: January 2017
Sun Storage 10 GbE FCoE ExpressModule Converged Network Adapter From QLogic Installation Guide For Adapter Models SG-EMFCOE2-Q-SR, SG-XEMFCOE2-Q-SR, SG-EMFCOE2-Q-TA, SG-XEMFCOE2-Q-TA, and 7101682
Document Information
Using This Documentation
Product Documentation Library
Feedback
Chapter 1 Converged Network Adapter Overview
Kit Contents
Converged Network Adapter Features and Specifications
Operating System and Technology Requirements
System Interoperability
Chassis Support
Host Platform Support
Storage Support
Array Support
Disk System Support
Tape Storage Support
Unified Storage Support
Switch Support
Software Support
Boot Support
Environmental Requirements
Chapter 2 Hardware Installation and Removal
Observing ESD and Handling Precautions
Installing the Hardware
To Install the Converged Network Adapter
To Connect the Optical Cables
To Connect the Copper Cables
Converged Network Adapter LEDs
Testing the Installation
To Verify Proper Installation (Oracle SPARC Systems)
To Verify Attached Storage (Oracle SPARC Systems)
To Verify Proper Installation (Oracle x86 Systems)
Updating the PXE
PXE Operating Systems
Package Files
Updating the Multi-Boot Code
Hardware and Software Configuration for Multi-Boot
Multi-Boot Code Update Utilities
Removing the Hardware
To Prepare the Adapter for Removal Using the Adapter Attention Button
To Prepare the Adapter for Hot-Plug Removal Using the Oracle Solaris OS
To Remove the Adapter
Chapter 3 Software Installation
Installing Software for the Oracle Solaris OS
Installing the Oracle Solaris Drivers
To Install or Update the qlc and qlge Converged Network Adapter Drivers From a Patch
Diagnostic Support for the Oracle Solaris OS
Installing Software for the Oracle Linux, Red Hat, or SUSE Linux OS
Downloading the Oracle Linux, Red Hat, or SUSE Linux Drivers
To Download the FCoE Driver
To Download the Networking Driver
Installing the Red Hat or SUSE Linux Drivers
To Build the FCoE Driver
Loading the Newly Built FCoE Driver
To Manually Load the FCoE Driver
To Automatically Load the FCoE Driver
Deploying the Networking Driver
To Create the Driver
To Install the Driver
To Rebuild the Driver
To Remove the Driver
Diagnostic Support for the Red Hat or SUSE OS
To Install Diagnostic Support for the Red Hat or SUSE Linux OS
Installing Software for the Oracle VM OS and VMware Technology
Installing Software for the Windows OS
Downloading the Windows Drivers
To Download the FCoE Driver
To Download the Networking Driver and Then Create a Driver Disk
Installing the Windows Drivers
To Install the FCoE Driver
To Install the Driver on Windows 2008
Updating the Existing FCoE Driver
To Update the Driver on Windows
Installing the Networking Driver
To Install the Networking Driver on Windows
Updating the Existing NDIS Miniport Driver
To Update the Networking Driver on Windows
To Remove the Driver
Diagnostic Support for the Windows OS
To Install Diagnostic Support for the Windows OS
Installing the CLI for Updating the BIOS and FCode
Chapter 4 Known Issues
Link Aggregation Control Protocol (LACP) Cannot Be Used In Certain Conditions
vpd r/w failed Error Messages Are Displayed
Error Message Occurs After Running the cfgadm -c configure ap-id Script
Adapter is Automatically Configured Upon Insertion Into a Chassis, But Then Goes Offline
FCIO_RESET_LINK Error Message Occurs After Issuing the luxadm -e forcelip Command
To Manually Unconfigure the Unusable Device
System Panic After Installing the Adapter in an x86 System
LEDs Turn On Sporadically After Pressing the Attention Button For Hot-Plug Removal
qlge Driver Keeps Sending NOTICE: Messages to the Console
The Adapter Is Not Logging Into the Brocade 8000 Switch
Windows Server 2008 R2 Stop Error
Language:
English
To Remove the Adapter
Prepare for removal, as described in
To Prepare the Adapter for Removal Using the Adapter Attention Button
or
To Prepare the Adapter for Hot-Plug Removal Using the Oracle Solaris OS
.
Disconnect the Fibre Channel and Ethernet cables.
With an ESD wrist strap attached, press down on the ExpressModule latch to disengage the adapter.
Pull forward on the ejector lever to dislodge the adapter.
Remove the adapter.
Previous
Next