Launch Oracle System Assistant Using the Oracle ILOM Web Interface
Before You Begin
You should have already set up Oracle ILOM for remote Ethernet access Connecting to Oracle ILOM
-
Ensure that the server is in standby power mode.
In server standby mode, the Power/OK indicator blinks slowly. See Front Panel Features for the location of the Power/OK
indicator.
-
Log in to the server SP Oracle ILOM web interface.
In your browser's address field, enter the server's SP IP address.
The System Summary screen appears.
-
Click the Oracle System Assistant Launch button in the upper right panel.
-
To continue to launch Oracle System Assistant, click Yes.
Wait while the server initializes. This might take several minutes.
-
Use Oracle System Assistant to perform the tasks shown in the following table in order.
Refer to the Oracle
X4 Series Servers Administration Guide (http://www.oracle.com/goto/x86AdminDiag/docs) or the embedded help on Oracle System Assistant for
more information about using Oracle System Assistant.
|
|
|
1
|
Set up Oracle System Assistant network connection.
|
Network Configuration
|
2
|
Get latest software and firmware updates.
|
Get Updates
|
3
|
Update Oracle ILOM, BIOS, disk expander, or HBA firmware, if needed.
|
Update Firmware
|
4
|
Configure Oracle ILOM.
|
Configure Hardware > Service Processor Configuration
|
5
|
Configure RAID.
Note -
Do not use this option on a disk with a preinstalled
OS.
|
Configure Hardware > RAID Configuration
|
6
|
Install an operating system using the Oracle System Assistant Install OS wizard. Supported
operating systems include Oracle Solaris, Linux, Windows, or Oracle VM software.
Note -
Do not use this option if your system came with a
preinstalled OS.
|
Install OS
|
|
Next Steps