Understanding the Installation
Understanding Management and Power Cabling
Single-Switch Location Guidelines
Attach the Rails to the Switch
Attach Telco Adapters to the Rack Slides
Attach the Rack Slides to the Rack
Install the Switch Into the Rack
Install the Air Duct and Front Support
Attach Data and Management Cables
Prepare the Front Support and Small Air Duct
Verify the DHCP-Assigned IP Address and Host Name
Configure Network Management From the CLI (SER MGT)
Log Into the Oracle ILOM Web (NET MGT)
Log Into the Oracle ILOM CLI (NET MGT)
Change a SEFOS User Privilege Level
Configure Network Management From the Web Interface
Configure Network Management From the CLI
Log Out of the Oracle ILOM CLI
Configuring the SEFOS Environment
Configuring the Switching Feature
Configuring the Routing Feature
Check Switch Status (Oracle ILOM)
See SER MGT Port.
See Front Panel Components for the location of the port.
This action establishes the connection between the terminal device and Oracle ILOM.
The Oracle ILOM login prompt appears.
SUNSPnnnnnnnnnn login:
The default user is root and the default password is changeme.
Once you have successfully logged in, the Oracle ILOM prompt appears.
->
Configure network management.
Perform administrative tasks.
Create SEFOS users.
Refer to the Oracle Switch ES1-24 Configuration Guide for additional information.