Oracle® Solaris Cluster 4.2 Hardware Administration Manual

Exit Print View

Updated: July 2014, E39726–01

How to Connect to a Node's Console Through the Terminal Concentrator

The following procedure enables remote connections from the administrative console to a cluster node's console by first connecting to the terminal concentrator.

  1. Connect to a node by starting a session with the terminal concentrator port to which the node is cabled.
    # telnet tc-name tc-port-number

    Specifies the name of the terminal concentrator.


    Specifies the port number on the terminal concentrator. Port numbers are configuration dependent. Typically, ports 2 and 3 (5002 and 5003) are used for the first cluster that is installed at a site.

    Note - If you set up node security, you are prompted for the port password.
  2. Log into the node's console.

    After establishing the telnet connection, the system prompts you for the login name and password.

  3. Set the terminal type, based on the type of window that was used in Step 1.
    # TERM=xterm
    # export TERM
Example 2-3  Connecting to a Node's Console Through the Terminal Concentrator

The following example shows how to connect to a cluster node in a configuration that uses a terminal concentrator. A Shell tool has already been started by using an xterm window.

admin-ws# telnet tc1 5002
Trying ...
Connected to
Escape character is '^]'.
pys-palindrome-1 console login: root
password: root-password
(for sh or ksh)
phys-palindrome-1# TERM=xterm; export TERM
(for csh)
phys-palindrome-1# set term=xterm