Go to main content

Oracle® Exadata Storage Server X5-2 Extreme Flash Service Manual

Exit Print View

Updated: January 2018
 
 

Power Down the Storage Server for Immediate Shutdown Using the Oracle CLI

Caution

Caution  -  This procedure quickly forces the storage server main power off. You might corrupt your system data during an immediate power-down, so use this procedure to power down the storage server only after attempting the graceful power-down procedure.

  1. Log in to the Oracle ILOM command-line interface (CLI) using an Administrator account.

    Oracle ILOM displays the default command prompt (->), indicating that you have successfully logged in to Oracle ILOM.

  2. From the CLI prompt, type the following command:

    -> stop -f /System

    The storage server powers down immediately.

  3. Disconnect the power and data cables from the storage server.

    See Disconnect Cables From the Storage Server.

    Caution

    Caution  -  When you power down the storage server using Oracle ILOM, the storage server enters standby power mode. Power is still directed to the service processor remote management subsystem and power supply fans. To completely power off the storage server, you must disconnect the power cords from the power supplies.

Related Information

Copyright © 2015, 2018, Oracle and/or its affiliates. All rights reserved. 
Previous
Next