To modify the network settings currently configured for the server from the Oracle ILOM web interface, use the following procedure:
See Log In to Oracle ILOM Using a Remote Ethernet Connection.
The Network Settings screen appears. Oracle ILOM displays the current settings.
To allow the DHCP server on your network to assign network settings, ensure that the DHCP radio button is selected and click Save.
To assign network settings, select the Static radio button and fill in the IP Address, Netmask, and Gateway fields. Then, click Save.
To configure an auto-configuration option, ensure that the Enabled check box next to the State property is selected. Then, select an auto-configuration value and click Save.
To set a static IPv6 address, ensure that the Enabled check box next to the State property is selected. Then, type the values for ipv6_address/subnet mask length in bits in the Static IP Address field and click Save.
For details, see Test IPv4 or IPv6 Network Configuration From the Oracle ILOM CLI.