Rack Compatibility
Check that your rack is compatible with the shelf rail assembly and back brackets.
These components are compatible with equipment racks that meet the standards listed in
the following table:
|
|
Structure
|
Four-post rack (mounting at both front and back). Two-post racks
are not compatible.
|
Rack horizontal opening and unit vertical pitch
|
Conforms to ANSI/EIA 310-D-1992 or IEC 60927 standards. Only M6
tapped or 9.5 mm square holes are supported.
|
Distance between front and back mounting planes
|
Minimum 610 mm and maximum 915 mm (24 inches to 36 inches).
|
Clearance depth in front of front mounting plane
|
Distance to front cabinet door is at least 25.4 mm (1
inch).
|
Clearance depth behind front mounting plane
|
Distance to back cabinet door is at least 900 mm (35.5 inches)
with the cable management arm, or 770 mm (30.4 inches) without the
cable management arm.
|
Clearance width between front and back mounting planes
|
Distance between structural supports and cable troughs is at least
456 mm (18 inches).
|
Server dimensions
|
|
|
See Also