Go to main content
Oracle® Server X6-2 Installation Guide

Exit Print View

Updated: October 2016
 
 

Power On the Host Using the Power Button

  1. Verify that the server is in standby power mode.

    See Preparing for Installation and Power On.

    In Standby power mode, the host is powered off but the SP is powered on. The power supplies are connected to a power source, the AC OK power supply indicator lights, the SP OK indicator is steady on, and the Power/OK status indicator flashes slowly.

  2. Locate the Power button on the front panel.
  3. Press the Power button.

    The host boots and the server enters full power mode. The system Power/OK indicator goes steady on when the host is fully booted.