Install the Fan Assembly Door
Note -
The procedures in this section should be used for systems configured with twelve
3.5-inch storage drives.
-
Place the fan assembly door on the chassis and slightly over the fan
assembly.
-
Slide the fan assembly door forward and under the lip of the forward top cover until it latches into place [1].
-
Use a No. 2 Phillips screwdriver to install and secure the fan assembly door
[2].
-
If your system is configured with twelve 3.5-inch storage drives, install
and tighten the two screws on each side of the chassis and the three screws on
top of the chassis.
-
If your system is configured with twenty-four 2.5-inch storage drives,
install and tighten the two screws on each side of the chassis.