Go to main content

Oracle® Server CLI Tools for Oracle Solaris 11.3 User's Guide

Exit Print View

Updated: April 2018

Verify the Host-to-ILOM Interconnect Settings

To verify if the Host-to-ILOM Interconnect is up and running do the following:

  1. To verify the Host-to-ILOM interconnect settings, type:

    # ilomconfig list interconnect

    The following is example output for this command.

    State: enabled
    Type: USB Ethernet
    SP Interconnect IP Address: 
    Host Interconnect IP Address:
    Interconnect Netmask:
    SP Interconnect MAC Address: 02:21:28:57:47:16
    Host Interconnect MAC Address: 02:21:28:57:47:17
  2. Make sure that you can ping the SP Interconnect IP Address. For example:

    # ping