The following tables list the traps that you may receive, their severity level, and how you will be notified that they have cleared (by traps that you may receive and by polls that you can make to the associated Location gateways).
Table 3.6 Guide to Configuration Traps
Trap OID and Definition | Severity | (When Cleared) Traps Received | (When Cleared) Polling Information |
---|---|---|---|
configChangeTrap Corente Services Gateway configuration has been changed. | info | N/A | N/A |
configOpen551Trap Neither side permits an inbound connection. | major | configTunClearTrap | TunnelTable entry, status is tunnelUp |
configSubnetCnfTrap Corente Services Gateway's partner has reported a Corente Services network subnet failure. | major | configTunClearTrap | TunnelTable entry, status is tunnelUp |
configNatPolicyTrap The NAT policy between this Corente Services Gateway and its partner is in conflict. For example, one side has a NAT policy of 'prohibited' and the other side has a 'specified' inbound or outbound NAT policy. | major | configTunClearTrap | TunnelTable entry, status is tunnelUp |
configNoInbSpaceTrap Inbound NAT policy is specified for the partner tunnel, but no available inbound space has been found to satisfy the request. | major | configTunClearTrap | TunnelTable entry, status is tunnelUp |
configNoMagSpaceTrap Auto Resolve is required for the declared range, but there is insufficient space in the Auto Resolve pools to satisfy the request. | major | configTunClearTrap | TunnelTable entry, status is tunnelUp |
configNatPrhbtTrap Auto Resolve policy is disabled, so the declared range will not be NAT-ed to a non-conflicting address. | major | configTunClearTrap | TunnelTable entry, status is tunnelUp |
configAddrCnfTrap Auto Resolve policy is disabled, and the declared range conflicts with or overlaps an address range already in use from the third Corente Services Gateway. | major | configTunClearTrap | TunnelTable entry, status is tunnelUp |
configAddrNestedTrap Auto Resolve policy is disabled, and the declared range nests inside an address range already in use from the third Corente Services Gateway. | major | configTunClearTrap | TunnelTable entry, status is tunnelUp |
configAddrCmmtdTrap The declared range is in conflict with an already committed inbound address range. | major | configTunClearTrap | TunnelTable entry, status is tunnelUp |
configInbAddrCnfTrap The declared inbound NAT address conflicts with the Corente Services Gateway's local User Group definition. | major | configTunClearTrap | TunnelTable entry, status is tunnelUp |
configDhcpFailTrap Client could not acquire an IP address from the Corente Services Gateway via DHCP. | major | configClearTrap | N/A |
configRasCnfTrap Partner does not accept RAS connections. | major | configClearTrap | N/A |
configLclAddrCnfTrap Local address ranges conflict with one another, due to their NAT policies. | major | configClearTrap | N/A |
configTubeFailTrap Unknown User Group. | major | configTunClearTrap | TunnelTable entry, status is tunnelUp |
configNoNatExtLinkTrap NAT is not permitted on external links. | major | configTunClearTrap | TunnelTable entry, status is tunnelUp |
configTunClearTrap This trap clears the tunnel configuration alarm trap identified by the partnerFullname. | clear | N/A | N/A |
configClearTrap This trap clears all Location gateway configuration alarm traps. | clear | N/A | N/A |
configIpsecDevTrap IPsec device is misconfigured. | major | configTunClearTrap | TunnelTable entry, status is tunnelUp |
Table 3.7 Guide to Failover Traps
Trap OID and Definition | Severity | (When Cleared) Traps Received | (When Cleared) Polling Information |
---|---|---|---|
failoverSubnetFailoverTrap User Group Failover occurred. | clear | N/A | N/A |
failoverSubnetFailbackTrap User Group Failback succeeded. | clear | N/A | N/A |
failoverSubnetFailTrap User Group Failover failed because no backup was available. | major | failoverSubnetFailover | N/A |
failoverBackChanTimeoutTrap Redundant Hardware Back-channel communication problem. | minor | failoverHardwareClear | N/A |
failoverHeartbeatTimeout Redundant Hardware missed heartbeat messages. | minor | failoverHardwareClear | N/A |
failoverLinkIntegTrap Redundant Hardware link integrity problem. | minor | failoverHardwareClear | N/A |
failoverTakeoverTrap Redundant Hardware takeover has been completed successfully. | info | N/A | N/A |
failoverHardwareClear This clears redundant hardware failover alarms: failoverBackChanTimeoutTrap, failoverHeartbeatTimeoutTrap, and failoverLinkIntegTrap. | clear | N/A | N/A |
Table 3.8 Guide to Corente SCP Traps
Trap OID and Definition | Severity | (When Cleared) Traps Received | (When Cleared) Polling Information |
---|---|---|---|
ncpTunDownTrap Tunnel between Corente SCP and Location gateway is down. | minor | ncpTunUpTrap | N/A |
ncpTunUpTrap Tunnel between Corente SCP and Location gateway is up. | clear | N/A | N/A |
Table 3.9 Guide to Partner Traps
Trap OID and Definition | Severity | (When Cleared) Traps Received | (When Cleared) Polling Information |
---|---|---|---|
partnerDownTrap Tunnel to buddy is down and not yet started. | major | partnerUpTrap | tunnelTable entry, status is tunnelUP |
partnerUpTrap Tunnel between Location gateway and its partner is up.. | clear | N/A | N/A |
Table 3.10 Guide to Security Traps
Trap OID and Definition | Severity | (When Cleared) Traps Received | (When Cleared) Polling Information |
---|---|---|---|
securityHndShkFailTrap Special digital handshake failed validation. | major | N/A | tunnelTable entry, status is tunnelUP |
securityHsDsvFailTrap Corrupted or hijacked key, bad digital signature, or violated message. | major | securityTunClearTrap | tunnelTable entry, status is tunnelUP |
securityHsIdFailTrap Self-verifying information does not match expected sender. | major | securityTunClearTrap | tunnelTable entry, status is tunnelUP |
securityHsChpFailTrap Wrong challenge response or returned message. | major | securityTunClearTrap | tunnelTable entry, status is tunnelUP |
securityHsMdsFailTrap Message missing digital signature. | major | securityTunClearTrap | tunnelTable entry, status is tunnelUP |
securityHsCmdFailTrap Possible corrupted message received from partner has unknown message type. | major | securityTunClearTrap | tunnelTable entry, status is tunnelUP |
securityHsOutFailTrap Message sequence from partner is out-of-order. | major | securityTunClearTrap | tunnelTable entry, status is tunnelUP |
securityOrgMultConnTrap Network device attempted to contact Location gateway as a partner that already has an active session. | info | N/A | N/A |
securityTunClearTrap This clears the tunnel security alarm identified by the partnerFullname. | clear | N/A | N/A |
Table 3.11 Guide to Software Error Traps
Trap OID and Definition | Severity | (When Cleared) Traps Received | (When Cleared) Polling Information |
---|---|---|---|
swErrorInvAclTrap Internal error detected while processing a local User Group tree. | major | swErrorClearTrap | N/A |
swErrorInvRmtAclTrap Internal error detected while processing a remote User Group tree. | major | swErrorTunClearTrap | tunnelTable entry, status is tunnelUP |
swErrorIntErrTrap Internal processing error. | minor | swErrorClearTrap | N/A |
swErrorClearTrap Internal processing error alarm trap is cleared. | clear | N/A | N/A |
swErrorTunClearTrap User Group processing error alarm trap has been cleared. | clear | N/A | N/A |
Table 3.12 Guide to General Traps
Trap OID and Definition | Severity | (When Cleared) Traps Received | (When Cleared) Polling Information |
---|---|---|---|
shutdownStartTrap Corente Services Gateway shutdown process has just started. | info | N/A | N/A |
upgradeStartTrap The automatic software upgrade process has just started. | info | N/A | N/A |
upgradeSuccessTrap The Corente Services Gateway software upgrade has completed successfully. | clear | N/A | N/A |
upgradeFailTrap Automatic software upgrade has failed. | critical | upgradeSuccessTrap | N/A |
nsNotifyShutdown An indication that the agent is in the process of being shut down. | info | N/A | N/A |
coldStart The SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered. | info | N/A | N/A |
Table 3.13 Guide to Application Monitoring Traps
Trap OID and Definition | Severity | (When Cleared) Traps Received | (When Cleared) Polling Information |
---|---|---|---|
appmonConfigTrap There is a problem with the configuration of application monitoring. | major | appmonAppSvcUpTrap, appmonAppSvcDownTrap, appmonAppSvcUnknownTrap, appmonAppSvcWarnTrap, appmonClearConfigTrap | N/A |
appmonAppSvcUpTrap Application service is up. | clear | N/A | N/A |
appmonAppSvcDownTrap Application service is down. | major | appmonAppSvcUpTrap | N/A |
appmonAppSvcUnknownTrap The status of the application service is unknown. | minor | appmonAppSvcUpTrap | N/A |
appmonAppSvcWarnTrap The status of the application service is warning. | minor | appmonAppSvcUpTrap | N/A |
appmonClearConfigTrap This clears the configuration alarm identified by appmonConfigTrap. | clear | N/A | N/A |
The Corente Services Gateway attempts to notify its trap listeners every 15 minutes if some service affecting alarms stay un-cleared. These repeated alarms are:
configOpen551Trap
configSubnetCnfTrap
configNatPolicyTrap
configNoInbSpaceTrap
configNoMagSpaceTrap
configNatPrhbtTrap
configAddrCnfTrap
configAddrNestedTrap
configAddrCmmtdTrap
configInbAddrCntTrap
configDhcpTailTrap
configRasCnfTrap
configLclAddrCnfTrap
configTubeFailTrap
configNoNatExtLinkTrap
failoverSubnetFailTrap
ncpTunDownTrap
partnerDownTrap
securityHndShkFailTrap
securityHsDsvFailTrap
securityHsIdFailTrap
securityHsChpFailTrap
securityHsMdsFailTrap
securityHsCmdFailTrap
securityHsOutFailTrap
swErrorLclAclTrap
swErrorInvRmtAclTrap
swErrorIntErrTrap
appmonConfigTrap
appmonAppSvcDownTrap