Viewing Pool and Device Status (BUI)
You can check the status of pool and component devices. If there is a problem with
a pool, details about device status will also be listed.
-
Navigate to Configuration > Storage.
-
Click a pool to select it and see more details.
Refer to the following table for a description of the pool status.
|
|
Online
|
A pool that has all devices operating normally.
|
Degraded
|
A pool with one or more failed devices, but the data is
still available due to a redundant configuration.
|
Faulted
|
One or more component devices are offline and there are
insufficient replicas to continue functioning.
|
Offline
|
A pool was explicitly taken offline.
|
Unavailable
|
A pool with corrupted metadata, or one or more unavailable
devices and insufficient replicas to continue functioning.
|
Exported
|
A pool is active on the cluster peer and is ready for a
cluster failback to occur.
|
|
-
View the selected pool's device statuses under the Device Status
section.
Refer to the following table for a description of the device status.
|
|
Online
|
The device is online and functioning. You may not see this
status, and instead see the message "No device faults have
been detected in the storage pool."
|
Degraded
|
The device is not in an optimal state. Either it is
expected to fail soon, or a spare has not finished
resilvering yet.
|
Faulted
|
The device is faulty; more information can be found in the
maintenance logs.
|
Offline
|
The device was explicitly taken offline; no reads or
writes will occur to this device until it has been
onlined.
|
Removed
|
The device has been physically removed.
|
Hot Spare
|
This spare device is actively being used as a data disk in
the pool as a replacement for a device that failed.
|
Unavailable
|
The device could not be opened or the pool could not
detect this device.
|
|
-
To see more detailed pool and device error information, navigate to
Maintenance > Problems for active errors, or Maintenance > Logs for a history of
all problems.