Go to main content

Oracle® ILOM Protocol Management Reference SNMP and IPMI Firmware Release 4.0.x

Exit Print View

Updated: August 2017

Add or Edit an SNMP v2c Community

To add or edit an SNMP v2c community, follow these steps:

  1. Log in to the Oracle ILOM web interface.
  2. On the left navigation panel, click ILOM Administration.
  3. Then click Management Access > SNMP.

    Scroll to the bottom half of the SNMP Management page to find the SNMP Communities dialog box.

  4. To edit a community, do the following:
    1. Click the appropriate community radio button.
    2. Click Edit.

      The Edit Community dialog box appears.

    3. Update community properties, as needed.
    4. Click Save.
  5. To add a community, do the following:
    1. Click Add.

      The Add Community dialog box appears.

    2. If you are adding a new community, type the name of the community in the Community Name field; otherwise, proceed to the next step.

      The community name can contain up to 35 characters. It must start with an alphabetic character and cannot contain a space.

    3. Click Save.