Go to main content

Oracle® ILOM Protocol Management Reference SNMP and IPMI Firmware Release 4.0.x

Exit Print View

Updated: August 2017

Manage SNMP Trap Alerts

Before You Begin

To configure SNMP Trap Alert properties, follow these steps:

  1. Log in to the Oracle ILOM web interface.
  2. On the left navigation panel, click ILOM Administration.
  3. Click Notifications > Alerts.

    The Alert Settings page appears. This page shows a table of the alerts that you can configure. You can configure up to 15 alerts.

    image:Screen shot of the Alert Settings page.
  4. To create or modify an alert, click the alert radio button.
  5. Then click Edit.

    The Create or Modify Alert dialog appears.

    image:Screen shot of the Alert dialog.
  6. In the Level drop-down list, select the level of the alert.
  7. In the Type drop-down list, select the alert type.
  8. In the IP Address field, specify the alert destination IP address.
  9. Click Save for your changes to take effect.