Viewing Component Information
Note -
You can use
get commands to view
component information. For a description of valid MIB objects for
this procedure, see the table following this procedure.
-
Log in to a host that has an SNMP tool and the Oracle ILOM MIBs installed. For
example, type:
ssh
username@snmp_manager_ip_address
Password:
password
-
To view the firmware revision, type:
% snmpget SNMP_agent entPhysicalFirmwareRev.1
The following table describes the Component Information SNMP MIB
objects.
|
|
|
|
|
entPhysical
Name
|
The textual name of the physical entity.
|
Size: 0 to 255
|
String
|
Zero- length string
|
entPhysical
Descr
|
A textual description of the physical entity.
|
Size: 0 to 255
|
String
|
None
|
entPhysical
ContainedIn
|
The value of entPhysicalIndex for the physical entity that
contains this physical entity. A
value of 0 indicates this physical entity is not contained
in any other physical entity.
|
Range: 0 to 2147483647
|
Integer
|
None
|
entPhysical
Class
|
An indication of the general hardware type of the physical
entity.
|
other(1),
unknown(2),
chassis(3),
backplane(4),
container(5),
powerSupply(6),
fan(7),
sensor(8),
module(9),
port(10),
stack(11)
|
Integer
|
None
|
entPhysical
FirmwareRev
|
The vendor-specific firmware revision string for the
physical entity.
|
Size: 0 to 255
|
String
|
Zero- length string
|
|