|Skip Navigation Links|
|Exit Print View|
|Netra Blade X3-2B (formerly Sun Netra X6270 M3 Server Module) HTML Document Collection|
To completely power off the blade, you must disengage the blade from the midplane connector inside the chassis. To completely remove power from a blade:
Caution - Blades can be safely removed only if the blue Ready to Remove LED is lit, or if you are certain that a firmware update is not in progress. Pulling the blade out of the chassis during a firmware update might damage the blade, which might not be repairable in the field.
Caution - Do not reinsert a blade until at least 20 seconds has elapsed since the blade was disengaged from the midplane connector.