Go to main content

SPARC S7-2L Server Service Manual

Exit Print View

» ...Documentation Home » SPARC S7-2L Server Documentation Library » SPARC S7-2L Server Service Manual » Returning the Server to Operation » Power On the Server (Oracle ILOM)

Updated: February 2019

SPARC S7-2L Server Service Manual

Document Information

Using This Documentation

Identifying Components

Detecting and Managing Faults

Preparing for Service

Servicing Drives

Servicing Fan Modules

Servicing Power Supplies

Servicing DIMMs

Servicing PCIe Cards

Servicing the eUSB Drive

Servicing the Battery

Servicing the Motherboard

Servicing the Drive Backplane

Returning the Server to Operation

Replace the Fan Cover

Install the Air Baffle

Replace the Top Cover

Return the Server to the Normal Operating Position

Attach Power Cords

Power On the Server (Oracle ILOM)

Power On the Server (System Power Button)

Language:

Power On the Server (Oracle ILOM)

Note - If you are powering on the server following an emergency shutdown that was triggered by the top cover interlock switch, you must use the poweron command.

Type this command at the Oracle ILOM prompt.
```
-> poweron
```
You will see an alert message on the system console. This message indicates that the server is reset. You will also see a message indicating that the VCORE has been margined up to the value specified in the default .scr file that was previously configured. For example:
```
-> start /System
```

Related Information

Copyright © 2016, 2019, Oracle and/or its affiliates. All rights reserved.