pcap - Packet Capture library
#include <pcap/pcap.h>
PCAP(3pcap) PCAP(3pcap)
NAME
pcap - Packet Capture library
SYNOPSIS
#include <pcap/pcap.h>
DESCRIPTION
The Packet Capture library provides a high level interface to packet
capture systems. All packets on the network, even those destined for
other hosts, are accessible through this mechanism. It also supports
saving captured packets to a ``savefile'', and reading packets from a
``savefile''.
Opening a capture handle for reading
To open a handle for a live capture, given the name of the network or
other interface on which the capture should be done, call pcap_cre-
ate(), set the appropriate options on the handle, and then activate it
with pcap_activate().
To obtain a list of devices that can be opened for a live capture, call
pcap_findalldevs(); to free the list returned by pcap_findalldevs(),
call pcap_freealldevs(). pcap_lookupdev() will return the first device
on that list that is not a ``loopback`` network interface.
To open a handle for a ``savefile'' from which to read packets, given
the pathname of the ``savefile'', call pcap_open_offline(); to set up a
handle for a ``savefile'', given a FILE * referring to a file already
opened for reading, call pcap_fopen_offline().
In order to get a ``fake'' pcap_t for use in routines that require a
pcap_t as an argument, such as routines to open a ``savefile'' for
writing and to compile a filter expression, call pcap_open_dead().
pcap_create(), pcap_open_offline(), pcap_fopen_offline(), and
pcap_open_dead() return a pointer to a pcap_t, which is the handle used
for reading packets from the capture stream or the ``savefile'', and
for finding out information about the capture stream or ``savefile''.
To close a handle, use pcap_close().
The options that can be set on a capture handle include
snapshot length
If, when capturing, you capture the entire contents of the
packet, that requires more CPU time to copy the packet to your
application, more disk and possibly network bandwidth to write
the packet data to a file, and more disk space to save the
packet. If you don't need the entire contents of the packet -
for example, if you are only interested in the TCP headers of
packets - you can set the "snapshot length" for the capture to
an appropriate value. If the snapshot length is set to snaplen,
and snaplen is less than the size of a packet that is captured,
only the first snaplen bytes of that packet will be captured and
provided as packet data.
A snapshot length of 65535 should be sufficient, on most if not
all networks, to capture all the data available from the packet.
The snapshot length is set with pcap_set_snaplen().
promiscuous mode
On broadcast LANs such as Ethernet, if the network isn't
switched, or if the adapter is connected to a "mirror port" on a
switch to which all packets passing through the switch are sent,
a network adapter receives all packets on the LAN, including
unicast or multicast packets not sent to a network address that
the network adapter isn't configured to recognize.
Normally, the adapter will discard those packets; however, many
network adapters support "promiscuous mode", which is a mode in
which all packets, even if they are not sent to an address that
the adapter recognizes, are provided to the host. This is use-
ful for passively capturing traffic between two or more other
hosts for analysis.
Note that even if an application does not set promiscuous mode,
the adapter could well be in promiscuous mode for some other
reason.
For now, this doesn't work on the "any" device; if an argument
of "any" or NULL is supplied, the setting of promiscuous mode is
ignored.
Promiscuous mode is set with pcap_set_promisc().
monitor mode
On IEEE 802.11 wireless LANs, even if an adapter is in promiscu-
ous mode, it will supply to the host only frames for the network
with which it's associated. It might also supply only data
frames, not management or control frames, and might not provide
the 802.11 header or radio information pseudo-header for those
frames.
In "monitor mode", sometimes also called "rfmon mode" (for
"Radio Frequency MONitor"), the adapter will supply all frames
that it receives, with 802.11 headers, and might supply a
pseudo-header with radio information about the frame as well.
Note that in monitor mode the adapter might disassociate from
the network with which it's associated, so that you will not be
able to use any wireless networks with that adapter. This could
prevent accessing files on a network server, or resolving host
names or network addresses, if you are capturing in monitor mode
and are not connected to another network with another adapter.
Monitor mode is set with pcap_set_rfmon(), and
pcap_can_set_rfmon() can be used to determine whether an adapter
can be put into monitor mode.
packet buffer timeout
If, when capturing, packets are delivered as soon as they
arrive, the application capturing the packets will be woken up
for each packet as it arrives, and might have to make one or
more calls to the operating system to fetch each packet.
If, instead, packets are not delivered as soon as they arrive,
but are delivered after a short delay (called a "packet buffer
timeout"), more than one packet can be accumulated before the
packets are delivered, so that a single wakeup would be done for
multiple packets, and each set of calls made to the operating
system would supply multiple packets, rather than a single
packet. This reduces the per-packet CPU overhead if packets are
arriving at a high rate, increasing the number of packets per
second that can be captured.
The packet buffer timeout is required so that an application
won't wait for the operating system's capture buffer to fill up
before packets are delivered; if packets are arriving slowly,
that wait could take an arbitrarily long period of time.
Not all platforms support a packet buffer timeout; on platforms
that don't, the packet buffer timeout is ignored. A zero value
for the timeout, on platforms that support a packet buffer time-
out, will cause a read to wait forever to allow enough packets
to arrive, with no timeout. A negative value is invalid; the
result of setting the timeout to a negative value is unpre-
dictable.
NOTE: the packet buffer timeout cannot be used to cause calls
that read packets to return within a limited period of time,
because, on some platforms, the packet buffer timeout isn't sup-
ported, and, on other platforms, the timer doesn't start until
at least one packet arrives. This means that the packet buffer
timeout should NOT be used, for example, in an interactive
application to allow the packet capture loop to ``poll'' for
user input periodically, as there's no guarantee that a call
reading packets will return after the timeout expires even if no
packets have arrived.
The packet buffer timeout is set with pcap_set_timeout().
immediate mode
In immediate mode, packets are always delivered as soon as they
arrive, with no buffering. Immediate mode is set with
pcap_set_immediate_mode().
buffer size
Packets that arrive for a capture are stored in a buffer, so
that they do not have to be read by the application as soon as
they arrive. On some platforms, the buffer's size can be set; a
size that's too small could mean that, if too many packets are
being captured and the snapshot length doesn't limit the amount
of data that's buffered, packets could be dropped if the buffer
fills up before the application can read packets from it, while
a size that's too large could use more non-pageable operating
system memory than is necessary to prevent packets from being
dropped.
The buffer size is set with pcap_set_buffer_size().
timestamp type
On some platforms, the time stamp given to packets on live cap-
tures can come from different sources that can have different
resolutions or that can have different relationships to the time
values for the current time supplied by routines on the native
operating system. See pcap-tstamp(7) for a list of time stamp
types.
The time stamp type is set with pcap_set_tstamp_type().
Reading packets from a network interface may require that you have spe-
cial privileges:
Under SunOS 3.x or 4.x with NIT or BPF:
You must have read access to /dev/nit or /dev/bpf*.
Under Solaris with DLPI:
You must have read/write access to the network pseudo device,
e.g. /dev/le. On at least some versions of Solaris, however,
this is not sufficient to allow tcpdump to capture in promiscu-
ous mode; on those versions of Solaris, you must be root, or the
application capturing packets must be installed setuid to root,
in order to capture in promiscuous mode. Note that, on many
(perhaps all) interfaces, if you don't capture in promiscuous
mode, you will not see any outgoing packets, so a capture not
done in promiscuous mode may not be very useful.
In newer versions of Solaris, you must have been given the
net_rawaccess privilege; this is both necessary and sufficient
to give you access to the network pseudo-device - there is no
need to change the privileges on that device. A user can be
given that privilege by, for example, adding that privilege to
the user's defaultpriv key with the usermod (8) command.
Under HP-UX with DLPI:
You must be root or the application capturing packets must be
installed setuid to root.
Under IRIX with snoop:
You must be root or the application capturing packets must be
installed setuid to root.
Under Linux:
You must be root or the application capturing packets must be
installed setuid to root (unless your distribution has a kernel
that supports capability bits such as CAP_NET_RAW and code to
allow those capability bits to be given to particular accounts
and to cause those bits to be set on a user's initial processes
when they log in, in which case you must have CAP_NET_RAW in
order to capture and CAP_NET_ADMIN to enumerate network devices
with, for example, the -D flag).
Under ULTRIX and Digital UNIX/Tru64 UNIX:
Any user may capture network traffic. However, no user (not
even the super-user) can capture in promiscuous mode on an
interface unless the super-user has enabled promiscuous-mode
operation on that interface using pfconfig(8), and no user (not
even the super-user) can capture unicast traffic received by or
sent by the machine on an interface unless the super-user has
enabled copy-all-mode operation on that interface using pfcon-
fig, so useful packet capture on an interface probably requires
that either promiscuous-mode or copy-all-mode operation, or both
modes of operation, be enabled on that interface.
Under BSD (this includes macOS):
You must have read access to /dev/bpf* on systems that don't
have a cloning BPF device, or to /dev/bpf on systems that do.
On BSDs with a devfs (this includes macOS), this might involve
more than just having somebody with super-user access setting
the ownership or permissions on the BPF devices - it might
involve configuring devfs to set the ownership or permissions
every time the system is booted, if the system even supports
that; if it doesn't support that, you might have to find some
other way to make that happen at boot time.
Reading a saved packet file doesn't require special privileges.
The packets read from the handle may include a ``pseudo-header'' con-
taining various forms of packet meta-data, and probably includes a
link-layer header whose contents can differ for different network
interfaces. To determine the format of the packets supplied by the
handle, call pcap_datalink(); https://www.tcpdump.org/linktypes.html
lists the values it returns and describes the packet formats that cor-
respond to those values.
Do NOT assume that the packets for a given capture or ``savefile`` will
have any given link-layer header type, such as DLT_EN10MB for Ethernet.
For example, the "any" device on Linux will have a link-layer header
type of DLT_LINUX_SLL even if all devices on the system at the time the
"any" device is opened have some other data link type, such as
DLT_EN10MB for Ethernet.
To obtain the FILE * corresponding to a pcap_t opened for a ``save-
file'', call pcap_file().
Routines
pcap_create(3PCAP)
get a pcap_t for live capture
pcap_activate(3PCAP)
activate a pcap_t for live capture
pcap_findalldevs(3PCAP)
get a list of devices that can be opened for a live cap-
ture
pcap_freealldevs(3PCAP)
free list of devices
pcap_lookupdev(3PCAP)
get first non-loopback device on that list
pcap_open_offline(3PCAP)
open a pcap_t for a ``savefile'', given a pathname
pcap_open_offline_with_tstamp_precision(3PCAP)
open a pcap_t for a ``savefile'', given a pathname, and
specify the precision to provide for packet time stamps
pcap_fopen_offline(3PCAP)
open a pcap_t for a ``savefile'', given a FILE *
pcap_fopen_offline_with_tstamp_precision(3PCAP)
open a pcap_t for a ``savefile'', given a FILE *, and
specify the precision to provide for packet time stamps
pcap_open_dead(3PCAP)
create a ``fake'' pcap_t
pcap_close(3PCAP)
close a pcap_t
pcap_set_snaplen(3PCAP)
set the snapshot length for a not-yet-activated pcap_t
for live capture
pcap_snapshot(3PCAP)
get the snapshot length for a pcap_t
pcap_set_promisc(3PCAP)
set promiscuous mode for a not-yet-activated pcap_t for
live capture
pcap_set_protocol_linux(3PCAP)
set capture protocol for a not-yet-activated pcap_t for
live capture (Linux only)
pcap_set_rfmon(3PCAP)
set monitor mode for a not-yet-activated pcap_t for live
capture
pcap_can_set_rfmon(3PCAP)
determine whether monitor mode can be set for a pcap_t
for live capture
pcap_set_timeout(3PCAP)
set packet buffer timeout for a not-yet-activated pcap_t
for live capture
pcap_set_immediate_mode(3PCAP)
set immediate mode for a not-yet-activated pcap_t for
live capture
pcap_set_buffer_size(3PCAP)
set buffer size for a not-yet-activated pcap_t for live
capture
pcap_set_tstamp_type(3PCAP)
set time stamp type for a not-yet-activated pcap_t for
live capture
pcap_list_tstamp_types(3PCAP)
get list of available time stamp types for a not-yet-
activated pcap_t for live capture
pcap_free_tstamp_types(3PCAP)
free list of available time stamp types
pcap_tstamp_type_val_to_name(3PCAP)
get name for a time stamp type
pcap_tstamp_type_val_to_description(3PCAP)
get description for a time stamp type
pcap_tstamp_type_name_to_val(3PCAP)
get time stamp type corresponding to a name
pcap_set_tstamp_precision(3PCAP)
set time stamp precision for a not-yet-activated pcap_t
for live capture
pcap_get_tstamp_precision(3PCAP)
get the time stamp precision of a pcap_t for live capture
pcap_datalink(3PCAP)
get link-layer header type for a pcap_t
pcap_file(3PCAP)
get the FILE * for a pcap_t opened for a ``savefile''
pcap_is_swapped(3PCAP)
determine whether a ``savefile'' being read came from a
machine with the opposite byte order
pcap_major_version(3PCAP)
pcap_minor_version(3PCAP)
get the major and minor version of the file format ver-
sion for a ``savefile''
Selecting a link-layer header type for a live capture
Some devices may provide more than one link-layer header type. To
obtain a list of all link-layer header types provided by a device, call
pcap_list_datalinks() on an activated pcap_t for the device. To free a
list of link-layer header types, call pcap_free_datalinks(). To set
the link-layer header type for a device, call pcap_set_datalink().
This should be done after the device has been activated but before any
packets are read and before any filters are compiled or installed.
Routines
pcap_list_datalinks(3PCAP)
get a list of link-layer header types for a device
pcap_free_datalinks(3PCAP)
free list of link-layer header types
pcap_set_datalink(3PCAP)
set link-layer header type for a device
pcap_datalink_val_to_name(3PCAP)
get name for a link-layer header type
pcap_datalink_val_to_description(3PCAP)
get description for a link-layer header type
pcap_datalink_name_to_val(3PCAP)
get link-layer header type corresponding to a name
Reading packets
Packets are read with pcap_dispatch() or pcap_loop(), which process one
or more packets, calling a callback routine for each packet, or with
pcap_next() or pcap_next_ex(), which return the next packet. The call-
back for pcap_dispatch() and pcap_loop() is supplied a pointer to a
struct pcap_pkthdr, which includes the following members:
ts a struct timeval containing the time when the packet was
captured
caplen a bpf_u_int32 giving the number of bytes of the packet
that are available from the capture
len a bpf_u_int32 giving the length of the packet, in bytes
(which might be more than the number of bytes available
from the capture, if the length of the packet is larger
than the maximum number of bytes to capture).
The callback is also supplied a const u_char pointer to the first
caplen (as given in the struct pcap_pkthdr mentioned above) bytes of
data from the packet. This won't necessarily be the entire packet; to
capture the entire packet, you will have to provide a value for snaplen
in your call to pcap_set_snaplen() that is sufficiently large to get
all of the packet's data - a value of 65535 should be sufficient on
most if not all networks). When reading from a ``savefile'', the snap-
shot length specified when the capture was performed will limit the
amount of packet data available.
pcap_next() is passed an argument that points to a struct pcap_pkthdr
structure, and fills it in with the time stamp and length values for
the packet. It returns a const u_char to the first caplen bytes of the
packet on success, and NULL on error.
pcap_next_ex() is passed two pointer arguments, one of which points to
a structpcap_pkthdr* and one of which points to a const u_char*. It
sets the first pointer to point to a struct pcap_pkthdr structure with
the time stamp and length values for the packet, and sets the second
pointer to point to the first caplen bytes of the packet.
To force the loop in pcap_dispatch() or pcap_loop() to terminate, call
pcap_breakloop().
By default, when reading packets from an interface opened for a live
capture, pcap_dispatch(), pcap_next(), and pcap_next_ex() will, if no
packets are currently available to be read, block waiting for packets
to become available. On some, but not all, platforms, if a packet buf-
fer timeout was specified, the wait will terminate after the packet
buffer timeout expires; applications should be prepared for this, as it
happens on some platforms, but should not rely on it, as it does not
happen on other platforms. Note that the wait might, or might not,
terminate even if no packets are available; applications should be pre-
pared for this to happen, but must not rely on it happening.
A handle can be put into ``non-blocking mode'', so that those routines
will, rather than blocking, return an indication that no packets are
available to read. Call pcap_setnonblock() to put a handle into non-
blocking mode or to take it out of non-blocking mode; call pcap_getnon-
block() to determine whether a handle is in non-blocking mode. Note
that non-blocking mode does not work correctly in Mac OS X 10.6.
Non-blocking mode is often combined with routines such as select(2) or
poll(2) or other routines a platform offers to wait for any of a set of
descriptors to be ready to read. To obtain, for a handle, a descriptor
that can be used in those routines, call pcap_get_selectable_fd(). If
the routine indicates that data is available to read on the descriptor,
an attempt should be made to read from the device.
Not all handles have such a descriptor available;
pcap_get_selectable_fd() will return PCAP_ERROR if no such descriptor
is available. If no such descriptor is available, this may be because
the device must be polled periodically for packets; in that case,
pcap_get_required_select_timeout() will return a pointer to a struct
timeval whose value can be used as a timeout in those routines. When
the routine returns, an attmept should be made to read packets from the
device. If pcap_get_required_select_timeout() returns NULL, no such
timeout is available, and those routines cannot be used with the
device.
In addition, for various reasons, one or more of those routines will
not work properly with the descriptor; the documentation for
pcap_get_selectable_fd() gives details. Note that, just as an attempt
to read packets from a pcap_t may not return any packets if the packet
buffer timeout expires, a select(), poll(), or other such call may, if
the packet buffer timeout expires, indicate that a descriptor is ready
to read even if there are no packets available to read.
Routines
pcap_dispatch(3PCAP)
read a bufferful of packets from a pcap_t open for a live
capture or the full set of packets from a pcap_t open for
a ``savefile''
pcap_loop(3PCAP)
read packets from a pcap_t until an interrupt or error
occurs
pcap_next(3PCAP)
read the next packet from a pcap_t without an indication
whether an error occurred
pcap_next_ex(3PCAP)
read the next packet from a pcap_t with an error indica-
tion on an error
pcap_breakloop(3PCAP)
prematurely terminate the loop in pcap_dispatch() or
pcap_loop()
pcap_setnonblock(3PCAP)
set or clear non-blocking mode on a pcap_t
pcap_getnonblock(3PCAP)
get the state of non-blocking mode for a pcap_t
pcap_get_selectable_fd(3PCAP)
attempt to get a descriptor for a pcap_t that can be used
in calls such as select(2) and poll(2)
pcap_get_required_select_timeout(3PCAP)
if no descriptor usable with select(2) and poll(2) is
available for the pcap_t, attempt to get a timeout usable
with those routines
Filters
In order to cause only certain packets to be returned when reading
packets, a filter can be set on a handle. For a live capture, the fil-
tering will be performed in kernel mode, if possible, to avoid copying
``uninteresting'' packets from the kernel to user mode.
A filter can be specified as a text string; the syntax and semantics of
the string are as described by pcap-filter(7). A filter string is com-
piled into a program in a pseudo-machine-language by pcap_compile() and
the resulting program can be made a filter for a handle with pcap_set-
filter(). The result of pcap_compile() can be freed with a call to
pcap_freecode(). pcap_compile() may require a network mask for certain
expressions in the filter string; pcap_lookupnet() can be used to find
the network address and network mask for a given capture device.
A compiled filter can also be applied directly to a packet that has
been read using pcap_offline_filter().
Routines
pcap_compile(3PCAP)
compile filter expression to a pseudo-machine-language
code program
pcap_freecode(3PCAP)
free a filter program
pcap_setfilter(3PCAP)
set filter for a pcap_t
pcap_lookupnet(3PCAP)
get network address and network mask for a capture device
pcap_offline_filter(3PCAP)
apply a filter program to a packet
Incoming and outgoing packets
By default, libpcap will attempt to capture both packets sent by the
machine and packets received by the machine. To limit it to capturing
only packets received by the machine or, if possible, only packets sent
by the machine, call pcap_setdirection().
Routines
pcap_setdirection(3PCAP)
specify whether to capture incoming packets, outgoing
packets, or both
Capture statistics
To get statistics about packets received and dropped in a live capture,
call pcap_stats().
Routines
pcap_stats(3PCAP)
get capture statistics
Opening a handle for writing captured packets
To open a ``savefile`` to which to write packets, given the pathname
the ``savefile'' should have, call pcap_dump_open(). To open a ``save-
file`` to which to write packets, given the pathname the ``savefile''
should have, call pcap_dump_open(); to set up a handle for a ``save-
file'', given a FILE * referring to a file already opened for writing,
call pcap_dump_fopen(). They each return pointers to a pcap_dumper_t,
which is the handle used for writing packets to the ``savefile''. If
it succeeds, it will have created the file if it doesn't exist and
truncated the file if it does exist. To close a pcap_dumper_t, call
pcap_dump_close().
Routines
pcap_dump_open(3PCAP)
open a pcap_dumper_t for a ``savefile``, given a pathname
pcap_dump_fopen(3PCAP)
open a pcap_dumper_t for a ``savefile``, given a FILE *
pcap_dump_close(3PCAP)
close a pcap_dumper_t
pcap_dump_file(3PCAP)
get the FILE * for a pcap_dumper_t opened for a ``save-
file''
Writing packets
To write a packet to a pcap_dumper_t, call pcap_dump(). Packets writ-
ten with pcap_dump() may be buffered, rather than being immediately
written to the ``savefile''. Closing the pcap_dumper_t will cause all
buffered-but-not-yet-written packets to be written to the ``savefile''.
To force all packets written to the pcap_dumper_t, and not yet written
to the ``savefile'' because they're buffered by the pcap_dumper_t, to
be written to the ``savefile'', without closing the pcap_dumper_t, call
pcap_dump_flush().
Routines
pcap_dump(3PCAP)
write packet to a pcap_dumper_t
pcap_dump_flush(3PCAP)
flush buffered packets written to a pcap_dumper_t to the
``savefile''
pcap_dump_ftell(3PCAP)
get current file position for a pcap_dumper_t
Injecting packets
If you have the required privileges, you can inject packets onto a net-
work with a pcap_t for a live capture, using pcap_inject() or
pcap_sendpacket(). (The two routines exist for compatibility with both
OpenBSD and WinPcap; they perform the same function, but have different
return values.)
Routines
pcap_inject(3PCAP)
pcap_sendpacket(3PCAP)
transmit a packet
Reporting errors
Some routines return error or warning status codes; to convert them to
a string, use pcap_statustostr().
Routines
pcap_statustostr(3PCAP)
get a string for an error or warning status code
Getting library version information
To get a string giving version information about libpcap, call
pcap_lib_version().
Routines
pcap_lib_version(3PCAP)
get library version string
BACKWARD COMPATIBILITY
In versions of libpcap prior to 1.0, the pcap.h header file was not in
a pcap directory on most platforms; if you are writing an application
that must work on versions of libpcap prior to 1.0, include <pcap.h>,
which will include <pcap/pcap.h> for you, rather than including
<pcap/pcap.h>.
pcap_create() and pcap_activate() were not available in versions of
libpcap prior to 1.0; if you are writing an application that must work
on versions of libpcap prior to 1.0, either use pcap_open_live() to get
a handle for a live capture or, if you want to be able to use the addi-
tional capabilities offered by using pcap_create() and pcap_activate(),
use an autoconf(1) script or some other configuration script to check
whether the libpcap 1.0 APIs are available and use them only if they
are.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
+---------------+------------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+------------------------+
|Availability | system/library/libpcap |
+---------------+------------------------+
|Stability | Uncommitted |
+---------------+------------------------+
SEE ALSO
autoconf(1), tcpdump(1), tcpslice(1), pcap-filter(7), pfconfig(8),
usermod(8)
AUTHORS
The original authors of libpcap are:
Van Jacobson, Craig Leres and Steven McCanne, all of the Lawrence
Berkeley National Laboratory, University of California, Berkeley, CA.
The current version is available from "The Tcpdump Group"'s Web site at
https://www.tcpdump.org/
BUGS
To report a security issue please send an e-mail to security@tcp-
dump.org.
To report bugs and other problems, contribute patches, request a fea-
ture, provide generic feedback etc please see the file CONTRIBUTING in
the libpcap source tree root.
NOTES
Source code for open source software components in Oracle Solaris can
be found at https://www.oracle.com/downloads/opensource/solaris-source-
code-downloads.html.
This software was built from source available at
https://github.com/oracle/solaris-userland. The original community
source was downloaded from https://www.tcpdump.org/release/libp-
cap-1.9.1.tar.gz.
Further information about this software can be found on the open source
community website at https://www.tcpdump.org/.
25 July 2018 PCAP(3pcap)