| Exit Print View | |
Sun Netra CP3270 ATCA Blade Server User’s Guide |
|
Documentation, Support, and Training
Evaluating Product Compatibility
Preparing to Install the Blade Server
Installing Components and Blade Server
Installing Optional Components
Software and Firmware Upgrades
Software and Firmware Upgrades
Administering Parameters and Configurations
Keys for Directing Output to Remote Systems
Emulated Terminal Types and Key Mapping
View Electronic Blade Server ID
Reset the System Time and Date
Administering User Accounts and Security
You can change the BIOS configuration by using a terminal (or terminal emulator connected to a computer) through the serial console port on the front of the blade server.
Note - Using the ANSI terminal emulation mode provides the best viewing of the BIOS screens.
To change the system’s parameters, enter the BIOS Setup utility by pressing the F2 key.
See 
BIOS Settings for summaries of the BIOS menus.
The first BIOS Setup menu screen is displayed.
Highlight the field to be modified using the arrow and Tab keys.
Press Enter to select the field.
A dialog box is displayed. The box displays the options that are available for the field that you have chosen.
Modify the field and close the screen.
To modify other parameters, use the arrow and Tab keys to navigate to the appropriate screen and menu item.
Repeat Step 2 through Step 4 until you are finished modifying parameters.
Press and release the right arrow key until the Exit menu screen is displayed.
Follow the instructions on the Exit menu screen to save your changes and exit the BIOS Setup utility.
|
