| Exit Print View | |
Sun Netra CP3270 ATCA Blade Server User’s Guide |
|
Documentation, Support, and Training
Evaluating Product Compatibility
Preparing to Install the Blade Server
Installing Components and Blade Server
Installing Optional Components
Software and Firmware Upgrades
Software and Firmware Upgrades
Administering Parameters and Configurations
Keys for Directing Output to Remote Systems
Emulated Terminal Types and Key Mapping
View Electronic Blade Server ID
Reset the System Time and Date
Administering User Accounts and Security
Reset jumper 11 to clear the CMOS settings, which restores the default BIOS settings.
The jumper housing should be stored in the J2/J4 position, which is the run position.
Remove the blade server.
Remove the jumper housing from the run position (J2/J4), and move it to the reset position (J1/J2).
Figure Legend
1 Default jumper settings
2 Clear CMOS settings
3 Clear RTC settings
Wait at least one second for the CMOS settings to reset, then move the jumper housing back to the run position.
Reinstall the blade server.
|
