Documentation, Support, and Training
Evaluating Product Compatibility
Form-Factor Physical Characteristics
Warranty and Technical Support
System Requirements and Options
Installing Optional Components
Preparing to Install the Blade Server
Power and Thermal Distribution
Required Cooling and Blade Impedance Curve
Local Network IP Addresses and Host Names
Connect the External I/O Cables
Connect Cables to a System Console Running the Oracle Solaris OS
Connect Cables to a System Console Not Running Oracle Solaris OS
Insert and Latch the Blade Server
Software and Firmware Upgrades
Software and Firmware Upgrades
Firmware and Blade Server Management
Creating a Boot Disk Server and Adding Clients
Create a Boot Server for Diskless Clients
Compact Flash Formatting for the Oracle Solaris OS
Multiplex Configuration of Zones 2 and 3
Advanced Rear Transition Module Connectors (Zone 3)
Locate Base MAC Address on Blade Server
Configuring and Using Serial Over LAN
Shut Down OS and Deactivate the Blade Server
Power Off and Remove the Blade Server
The CLI can be used to communicate with the intelligent management controllers of the shelf, with blade servers, and with the ShMM itself, through text commands.
The CLI is an IPMI-based set of commands that can be accessed directly or through a higher-level management application or script. Administrators can access the CLI through a Telnet connection or the shelf management card serial port.
Using the CLI, operators can access information about the current state of the shelf including current FRU population, current sensor values, threshold settings, recent events, and overall shelf health.
For detailed instructions on using the CLI, including a list of commands and their parameters, refer to the Sun Netra CT900 Server Administration and Reference Manual, which is available at the following web site:
http://www.oracle.com/pls/topic/lookup?ctx=ct900[amp ]id=homepage