Documentation, Support, and Training
Evaluating Product Compatibility
Form-Factor Physical Characteristics
Warranty and Technical Support
System Requirements and Options
Installing Optional Components
Preparing to Install the Blade Server
Power and Thermal Distribution
Required Cooling and Blade Impedance Curve
Local Network IP Addresses and Host Names
Connect the External I/O Cables
Connect Cables to a System Console Running the Oracle Solaris OS
Connect Cables to a System Console Not Running Oracle Solaris OS
Insert and Latch the Blade Server
Software and Firmware Upgrades
Software and Firmware Upgrades
Firmware and Blade Server Management
Creating a Boot Disk Server and Adding Clients
Create a Boot Server for Diskless Clients
Compact Flash Formatting for the Oracle Solaris OS
Multiplex Configuration of Zones 2 and 3
Advanced Rear Transition Module Connectors (Zone 3)
Locate Base MAC Address on Blade Server
Configuring and Using Serial Over LAN
Shut Down OS and Deactivate the Blade Server
Power Off and Remove the Blade Server
In addition to the programming topics in this user’s guide, additional procedures, reference, and information for Oracle’s Netra SPARC T3-1BA blade server and all other Netra blade servers are available in the following documents:
Netra CT900 Server Administration and Reference Manual
Netra CT900 Server Software Developer’s Guide
Netra CT900 Server Service Manual
http://www.oracle.com/pls/topic/lookup?ctx=ct900[amp ]id=homepage
Even if you are using the blade server in a third-party shelf, the information in these other documents will be useful.
The following topics provide information and instructions for programming the blade server.