Sun Flash Accelerator F40 PCIe Card Overview
About the Sun Flash Accelerator F40 PCIe Card
Card Software and Firmware Components
Preparing the Card for Installation
Perform ESD Prevention Measures
Update the Host Operating System
Installing the Card Into a Server
Remove an Existing Card From a Server
Servicing the Card Using the ddcli Utility
Access Command Line Interface (CLI) in ddcli Utility
Show the Vital Product Data Command
Troubleshooting Using Card LEDs
To access the ddcli utility in text menu mode:
The ddcli utility displays the following top-level menu, showing a list of cards in the system. Two Sun Flash Accelerator F40 PCIe Cards are shown in the following example:
ID WarpDrive Package Version PCI Address -- --------- --------------- ----------- 1 ELP-4x100-4d-n 06.05.10.00 00:02:00:00 2 ELP-4x100-4d-n 06.05.10.00 00:03:00:00 Select the WarpDrive [1-2 or 0:Quit]
1. List WarpDrive Information 2. Update Flash Package 3. Display WarpDrive Health 4. Locate WarpDrive 5. Format WarpDrive 6. Show Vital Product Data 7. Extract SMART Logs Select Operation [1-7 or 0:Quit]: