Sun Flash Accelerator F40 PCIe Card Overview
About the Sun Flash Accelerator F40 PCIe Card
Card Software and Firmware Components
Preparing the Card for Installation
Perform ESD Prevention Measures
Update the Host Operating System
Installing the Card Into a Server
Remove an Existing Card From a Server
Servicing the Card Using the ddcli Utility
Access Text Menu Interface in ddcli Utility
Access Command Line Interface (CLI) in ddcli Utility
Troubleshooting Using Card LEDs
The -showvpd command display s the VPD information on the selected Sun Flash Accelerator F40 PCIe Card.
The VPD (Vital Product Data) definitions are:
|
Text Menu Interface Usage: The following top-level menu lists the cards in the system and prompts you to select a card on which to perform an operation. Two Sun Flash Accelerator F40 PCIe Cards are shown in the following example:
# ddcli ID WarpDrive Package Version PCI Address -- --------- --------------- ----------- 1 ELP-4x100-4d-n 06.05.10.00 00:09:00:00 2 ELP-4x100-4d-n 06.05.10.00 00:05:00:00 Select the WarpDrive [1-2 or 0:Quit]: 1 1. List WarpDrive Information 2. Update Flash Package 3. Display WarpDrive Health 4. Locate WarpDrive 5. Format WarpDrive 6. Show Vital Product Data 7. Extract SMART Logs Select Operation [1-7 or 0:Quit]: 6
Command Line Interface Usage: Enter the following line of text in the CLI to run the -showvpd command: ddcli -c 1 -showvpd.
Sample Output: When the -showvpd command runs, the ddcli utility outputs the following text.
# ddcli -showvpd ----------------------------------------------------------- VPD Information ----------------------------------------------------------- Product Name : Sun Flash Accelerator F40 PCIe 2.0 Low Profile Adapter PN : 7026993 EC : L3-25487-02B SN : 464168P+1224002406 VA : Flash HBA VB : 0000 V1 : LSI Corporation V2 : 1000 V3 : 007E V4 : 108E V5 : 0581 V6 : 17.6W V7 : 5.8W V8 : 0.1W MN : 10080 RV : 0x87 V1 : SP22429978 V3 : 00 V4 : A3 V6 : V6 V7 : P -----------------------------------------------------------