| Skip Navigation Links | |
| Exit Print View | |
|
Sun Flash Accelerator F40 PCIe Card User's Guide |
Sun Flash Accelerator F40 PCIe Card Overview
About the Sun Flash Accelerator F40 PCIe Card
Card Software and Firmware Components
Preparing the Card for Installation
Perform ESD Prevention Measures
Update the Host Operating System
Installing the Card Into a Server
Remove an Existing Card From a Server
Servicing the Card Using the ddcli Utility
Access Text Menu Interface in ddcli Utility
Access Command Line Interface (CLI) in ddcli Utility
Show the Vital Product Data Command
Troubleshooting Using Card LEDs
The -list command lists the physical device information of a selected Sun Flash Accelerator F40 PCIe Card.
The following Sun Flash Accelerator F40 PCIe Card information is displayed with the -list command.
Sun Flash Accelerator F40 PCIe Card ID
PCI address
SAS address
Card flash package version
RAID support
Text Menu Interface Usage: The following top-level menu lists the cards in the system and prompts you to select a card on which to perform an operation. Two Sun Flash Accelerator F40 PCIe Cards are shown in the following example:
# ddcli ID WarpDrive Package Version PCI Address -- --------- --------------- ----------- 1 ELP-4x100-4d-n 06.05.10.00 00:02:00:00 2 ELP-4x100-4d-n 06.05.10.00 00:03:00:00 Select the WarpDrive [1-2 or 0:Quit]: 1 1. List WarpDrive Information 2. Update Flash Package 3. Display WarpDrive Health 4. Locate WarpDrive 5. Format WarpDrive 6. Show Vital Product Data 7. Extract SMART Logs Select Operation [1-7 or 0:Quit]: 1
Command Line Interface Usage: In CLI mode, select a Sun Flash Accelerator F40 PCIe Card by including its card number (adapter index). Enter the following line of text in the CLI to run the -list command: ddcli -c 1 -list
Sample Output: When the -list command runs, the ddcli utility outputs the following text:
# ddcli -c 1 -list **************************************************************** LSI Corporation WarpDrive Management Utility Version 107.00.00.04 (2012.06.05) Copyright (c) 2011 LSI Corporation. All Rights Reserved. **************************************************************** WarpDrive Selected is ELP-4x100-4d-n ----------------------------------------------------------------- WarpDrive Information ----------------------------------------------------------------- WarpDrive ID : 1 PCI Address : 00:05:00:00 SAS Address : 500605B 0047A4990 Package Version : 06.05.10.00 RAID Support : NO ----------------------------------------------------------------- Physical Device Information ----------------------------------------------------------------- Device is a Solid State Drive SSD Slot # : 4 Cage : 1 Location : Upper Capacity (in bytes) : 100030242304 Manufacturer ID : 516 Model Number : 3E128-TS2-550B00 Serial Number : 5L0010RY Firmware Revision : PRO6TI35 Link Rate : 6.0 Device is a Solid State Drive SSD Slot # : 5 Cage : 1 Location : Lower Capacity (in bytes) : 100030242304 Manufacturer ID : 516 Model Number : 3E128-TS2-550B00 Serial Number : 5L0010RY Firmware Revision : PRO6TI35 Link Rate : 6.0 Device is a Solid State Drive SSD Slot # : 6 Cage : 2 Location : Upper Capacity (in bytes) : 100030242304 Manufacturer ID : 516 Model Number : 3E128-TS2-550B00 Serial Number : 5L0010RY Firmware Revision : PRO6TI35 Link Rate : 6.0 Device is a Solid State Drive SSD Slot # : 7 Cage : 2 Location : Lower Capacity (in bytes) : 100030242304 Manufacturer ID : 516 Model Number : 3E128-TS2-550B00 Serial Number : 5L0010RY Firmware Revision : PRO6TI35 Link Rate : 6.0
|