This section describes error messages that indicate problems while performing hot-plugging operations with SATA devices and possible solutions.
do_control_ioctl: open failed: errno:2 cfgadm: Library error: Cannot open ap_id: /devices/pci@0,0/pci10... No such file or directory
Cause: Might indicate that you are configuring or unconfiguring the device by specifying the device's logical Ap_Id with the cfgadm command, such as sata0/0::dsk/c7t0d0. Use the HBA Ap_Id or controller number instead.
Unconfigure the device at: /devices/pci@2,0/pci1022...
This operation will suspend activity on the SATA device
Continue (yes/no)? y
cfgadm: Hardware specific failure: Failed to unconfig device \
at ap_id: /devices/pci@2,0/pci10...
Cause: Indicates that you are unconfiguring a device that is part of an active ZFS storage pool. Remove that device from the pool first.