Use this procedure to install the server chassis, with mounting brackets attached, into the slide rail assemblies that are mounted to the rack.
Caution - This procedure requires a minimum of two people because of the weight of the server. Attempting this procedure alone could result in equipment damage or personal injury. |
Caution - Always load equipment into a rack from the bottom up so that the rack does not become top-heavy and tip over. Extend the rack's antitilt bar to prevent the rack from tipping during equipment installation. |
See Install the Rackmount Hardware and Attach Slide Rail Assemblies to the Rack.
|
Continue pushing the server into the rack until the slide rail locks (on the front of the mounting brackets) engage the slide rail assemblies.
You hear an audible click when the slide rail locks are engaged.
Caution - Verify that the server is securely mounted in the rack and that the slide rail locks are engaged with the mounting brackets before you install the optional CMA. |
See Prepare the CMA for Installation.
If you are not using the CMA, see Verify Operation of Slide Rails and CMA.