このセクションでは、Oracle Solaris 11.3 リリースでのハードウェアに関する問題について説明します。
ターゲットアドレスへの接続が一時的に中断された場合、180 秒 (3 分) のデフォルトの iSCSI 最大接続再試行時間は、iSCSI ブートデバイスを使用しているイニシエータには不十分である可能性があります。次のエラーメッセージが表示されます。
NOTICE: iscsi connection(19) unable to connect to target iqn.1986-03.com.sun:02:hostname, target address 192.168.001.160
回避方法: iSCSI ブートデバイスを使用しているイニシエータでは、iSCSI 最大接続再試行時間を少なくとも 1080 秒 (18 分) に増やします。
suriadm lookup-uri コマンドが、DMP (Distributed Memory Parallel) モードにある Aura2.1 Flash Accelerator のすべての URI (Uniform Resource Identifier) 情報を返すことに失敗する場合があります。次のエラーメッセージが表示されます。
$ suriadm lookup-uri c10t5002361000099204d0 Failed to look up "file" URI for device: "/dev/dsk/c10t5002361000099204d0": Failed to look up file name associated with lofi device: unable to get mapping information: Invalid argument lu:luname.naa.5002361000099204 lu:initiator.naa.500605b0064c7100,target.naa.5002361000099204,luname.naa.5002361000099204 Failed to look up "nfs" URI for device: "/dev/dsk/c10t5002361000099204d0": Failed to look up file name associated with lofi device: unable to get mapping information: Invalid argument
回避方法: 次のコマンドを実行して MPxIO モードを有効にします。
$ stmsboot -e
ホストを MPxIO モードに変更したあと、suriadm lookup-uri コマンドによってすべての情報が表示されます。
Oracle Public Library (OPL) システム (M3000、M4000、M5000、M8000) が、ntp デーモンからの次のメッセージを報告する場合があります。
Aug 26 02:22:19 mysystem.us.example.com ntpd[956]: [ID 702911 daemon.notice] frequency error 7054 PPM exceeds tolerance 500 PPM Aug 26 02:31:04 mysystem.us.example.com ntpd[956]: [ID 702911 daemon.notice] frequency error 7021 PPM exceeds tolerance 500 PPM Aug 26 02:33:16 mysystem.us.example.com ntpd[956]: [ID 702911 daemon.notice] frequency error 2139 PPM exceeds tolerance 500 PPM Aug 26 02:42:03 mysystem.us.example.com ntpd[956]: [ID 702911 daemon.notice] frequency error 7037 PPM exceeds tolerance 500 PPM
回避方法: システム上の時間が正しいことを確認します。正しくない場合は、必要に応じてそれをリセットします。