Remove the SER MGT Cable

1. Locate the SER MGT cable at the rear of the switch.

   See Rear Panel Components.

   
   
2. Pinch the tab and opposite side of the RJ-45 connector between your thumb and forefinger.

   Use either your thumb or forefinger to depress the release tab.

3. Pull the RJ-45 connector straight out of the receptacle.
4. Determine your next step:
   • If you removed the SER MGT cable as part of another task, return to that task.
   • If you removed the SER MGT cable before removing the switch, continue to Remove the Switch.

Related Information

• Switch LEDs

• Determine if the Switch Is Faulty

• Install the SER MGT Cable

• Verify the Switch