Go to main content

Oracle® Servers X7-2 and X7-2L Installation Guide

Exit Print View

Updated: July 2020
 
 

Power On the Host Using the On/Standby Button

  1. Verify that the server is in Standby power mode.

    See Preparing for Installation and Power On.

    In Standby power mode:

    • Host is powered off but the SP is powered on.

    • Power supplies are connected to a power source.

    • AC OK power supply indicators illuminate.

    • SP OK indicator is steady on.

    • System OK status indicator blinks slowly.

  2. Locate and press the On/Standby button on the front panel.

    With the power on:

    • Host boots and the server enters Main power mode

    • System OK indicator goes steady on when the host is fully booted