Install a Memory Riser
 | Caution - This procedure requires handling components that are sensitive to ESD. Follow antistatic practices to avoid damage or component failure. |
The system must be completely powered down before performing this procedure. See Component Service Categories for more information about cold-service procedures.
Perform this procedure to install a memory riser in order to replace a faulty memory riser or to install a memory riser you removed to access other components, such as the DIMMs on the motherboard.
-
Align the memory riser with the four standoffs.
The handle on the memory riser is closest to the center of the server.
-
Lower the handle on the memory riser to seat the connector.
-
Tighten the four screws that secure the memory riser to the standoffs.
Use a T15 Torx driver to tighten the captive screws.
-
Install any remaining DIMMs in the memory riser slots.
See Install a DIMM.
- Return the Server to Operation.