Go to main content

Oracle® Exadata X8-2 Database Server Service Manual

Exit Print View

Updated: July 2020

Install a Fan Module

  1. Remove the replacement fan module from its packaging and place it on an antistatic mat.
  2. With the server top cover removed, position the replacement fan module into the server.

    The fan modules are keyed to ensure that they are installed in the correct orientation.

    image:Figure showing fan module installation.
  3. Press down on the fan module and apply firm pressure to fully seat the fan module.
  4. Verify that the fan module status indicator (LED) that aligns with the replaced fan module is not illuminated.
  5. Install the server top cover.

    See Install the Server Top Cover.

  6. Verify that the Top Fan Fault LED on the front of the server and the Fault-Service Required LEDs on the front and back of the server are off.

    See Troubleshooting Using the Server Front and Back Panel Status Indicators for more information about identifying and interpreting system indicators.

  7. Consider your next step:
    • If you installed the fan module as part of another procedure, return to that procedure.

    • Otherwise, return the server to operation. See Returning the Server to Operation.

Related Information