S
- safety
- ESD precautions
Electrostatic Discharge Safety
- precautionsSafety Precautions
- symbolsSafety Symbols
- ESD precautions
- SAS cable assembly
- installingInstall the Internal HBA Cables
- removingRemove the Internal HBA Cables
- installing
- SAS cables
- descriptionReplaceable Components
- description
- SAS drive cables
- servicingServicing the Internal HBA Cables
- servicing
- screens, BIOS Setup Utility
- serial management (SER MGT) port
- configuring serial port sharingConfiguring Serial Port Sharing
- pinoutsSerial Management Port
- RJ-45 to DB-9 crossover pinoutsSerial Management Port
- configuring serial port sharing
- serial number, locatingLocating the Chassis Serial Number
- serial port sharing
- configuringConfiguring Serial Port Sharing
- configuring
- server
- installing into rackReinstall the Server Into the Rack
- physical specificationsServer Physical Specifications
- removing from rackRemove the Server From the Rack
- troubleshootingTroubleshooting Server Component Hardware Faults
- installing into rack
- Server hardware faults
- server top cover
- installingInstall the Server Top Cover
- removingRemove the Server Top Cover
- installing
- server troubleshooting information
- contacting supportContacting Support
- contacting support
- server, power onAccess BIOS Setup Utility Menus
- service
- preparing serverPreparing the Server for Component Replacement
- returning server to operationReturning the Server to Operation
- preparing server
- service processor
- resetting using pinhole switchBack Panel Pinhole Switches
- resetting using pinhole switch
- Service Required indicatorServer System-Level Status Indicators
- set commandInstall a Processor
- shortcut key sequences in BIOS Setup UtilityBIOS Key Mappings
- show commandInstall a Processor
- shutting down the system
- immediatelyPowering Down the Server
- immediately using Oracle ILOM CLIPower Down the Server for Immediate Shutdown Using the Oracle ILOM
CLI
- immediately using Oracle ILOM web interfacePower Down the Server for Immediate Shutdown Using the Oracle ILOM Web
Interface
- immediately using the On/Standby button
- immediately using the Oracle ILOM CLIPower Down the Server for Immediate Shutdown Using the Oracle ILOM
CLI
- immediately
- Simple Network Management Protocol (SNMP) Traps
- entity presence eventsEntity Presence Events
- environmental eventsEnvironmental Events
- fan eventsFan Events
- hard disk drive eventsHard Disk Drive Events
- memory eventsMemory Events
- power eventsPower Events
- entity presence events
- standby power
- status indicators
- Ethernet portsEthernet Ports Status Indicators
- fan moduleServer Fan Status Indicators
- motherboard assemblyMotherboard Status Indicators
- network management (NET MGT)Network Management Port Status Indicators
- storage drivesStorage Drive Status Indicators
- system statusServer System-Level Status Indicators
- Ethernet ports
- storage drives
- descriptionReplaceable Components
- hot-pluggingStorage Drives Hot-Plug Conditions
- identificationRemove a Storage Drive
- installingInstall a Storage Drive
- latch release buttonRemove a Storage Drive
- removingRemove a Storage Drive
- status indicatorsStorage Drive Status Indicators
- description
- support for productContacting Support
- system chassis componentsSystem Chassis Components
- system components and nomenclatureMonitoring System Components
- system firmware componentsSystem Firmware Components
- system motherboard componentsSystem Motherboard Components
- System OK indicator