|Skip Navigation Links|
|Exit Print View|
|Netra Blade X3-2B (formerly Sun Netra X6270 M3 Server Module) HTML Document Collection|
If Oracle System Assistant has been erased or corrupted, you can download the image file that is available from the My Oracle Support site to restore it to the USB device. Restore Oracle System Assistant software after replacing a USB drive, or as required.
Download the image that is specific to your server. The package name for the update image for the server is: X6270 M3 SW version -- Oracle System Assistant
For example, for the Netra Blade X3-2B, you could download the update image: Sun_Blade_X6270_M3-184.108.40.206555-ORACLE_SYSTEM_ASSISTANT_UPDATER_ 4G.iso. This file name is an example, and you need to download the correct file.
For information about accessing My Oracle Support and downloading this image, see Netra Blade X3-2B Product Notes.
Install the DVD in a DVD drive attached to the server.
Note - You can also make the DVD available to the server as a redirected DVD by using Oracle ILOM Remote Console application.
Choose one of the following methods:
The BIOS screen is displayed.
Note - The next events occur very quickly; therefore, focused attention is needed for the following steps. Please watch carefully for these messages as they appear only briefly on the screen.
The Please Select Boot Device screen is displayed.
Note - The items listed in the Please Select Boot Device menu might differ, depending on whether the system was booted in Legacy BIOS or UEFI Boot mode.
A message is displayed, and a prompt asks whether you want to continue the recovery process.
The following message is displayed, indicates the progress of the recovery process, and, when it completes, asks whether the recovered Oracle System Assistant USB flash drive must be verified to ensure that it was programmed correctly.
The following screen is displayed and indicates that the Oracle System Assistant USB device was verified successfully. The system then reboots and launches the Oracle System Assistant application.
The confirmation screen is displayed and indicates that the recovery is complete. The system then reboots and launches the Oracle System Assistant application.
Netra Blade X3-2B Product Notes