Oracle^® X8 Series Servers Administration Guide

Clear Faults Manually (Oracle ILOM)

Typically, when a faulted component is replaced or removed, Oracle ILOM and Hardware Management Pack stop reporting the component as faulted. However, certain field-replaceable units (FRUs) require an explicit repair. For these you must manually clear the fault in the Oracle ILOM Fault Management shell to stop it from appearing in the open problems output.

1. Ensure that you have Admin (a) role privileges in Oracle ILOM.
2. Log in to the Oracle ILOM command-line interface.
3. To launch the Oracle ILOM Fault Management shell, type start /SP/faultmgmt/shell.
4. To confirm that you want to start the Oracle ILOM Fault Management shell, at the confirmation prompt, type y.
5. At the faultmgmtsp> prompt, use the fmadm utility to indicate that a component must not be considered faulted.

   For more information, refer to Using the Oracle ILOM Fault Management Shell, Oracle ILOM Administrator's Guide for Configuration and Maintenance, Firmware Release 4.0.x at: https://www.oracle.com/goto/ilom/docs.