Oracle ILOM Service-Related Commands

You can use these Oracle ILOM shell commands when performing service-related tasks.

Oracle ILOM Command Description fmadm acquit message_ID Manually clears PSH faults. Note -  To run this command in Oracle ILOM, you must start the fault management shell. See Check for Faults. fmadm faulty Displays the list of faults detected by PSH. Note -  To run this command in Oracle ILOM, you must start the fault management shell. See Check for Faults. help [command] Displays a list of all available commands with syntax and descriptions. Specifying a command name as an option displays help for that command. reset /SP Reboots the SP. reset /System Generates a hardware reset on the host server module. set /HOST send_break_action=break Takes the host server module from the OS to either kmdb or OBP (equivalent to a Stop-A), depending on the mode Oracle Solaris software was booted. set /HOST/bootmode property=value Controls the host server module OBP firmware method of booting. property is state, config, or script. set /HOST keyswitch_state=value Sets the virtual keyswitch. value is normal, standby, diag, or locked. set /System locator_indicator=value Turns the Locator LED on the server module on or off. value is on or off. show /HOST Displays information about the host firmware version and configuration. show /HOST/console/history Displays the contents of the host's console buffer. show /SP/logs/event/list Displays the history of all events logged in the SP event buffers (in RAM or the persistent buffers). show /SYS Displays information about the server module, including the serial number. show /HOST keyswitch_state Displays the status of the virtual keyswitch. show /System Displays information about the operating state of the host, serial numbers, network addresses, and whether the hardware is providing service. show /System locator_indicator Displays the current state of the Locator LED. show faulty Displays current server module faults. start /HOST/console Connects to the host console. start /System Powers on the host server module. stop /System Powers off the host server module.

Related Information

• Tool Availability