Set the Server Module to a Ready-to-Remove State

Perform this task before you remove the server module from the modular system.

1. Log in to Oracle ILOM.

   See Log In To Oracle ILOM (Service).

2. Ensure that the host is powered off.

   Perform one of these commands according to the way that you logged into Oracle ILOM:

   • From the CMM, type.

     -> show /Servers/Blades/Blade_n/System power_state
       /Servers/Blades/Blade_5/System
         Properties:
             power_state = Off
     

   • From the server module, type.

     -> show /System power_state
     /System
      properties:
       power_state = Off
     

3. If the host is not powered off, power the host off.

   • From the CMM, type.

     -> stop /Servers/Blades/Blade_n/System
     

   • From the server module, type.

     -> stop /System
     

4. Prepare the server module for removal.

   Perform one of these commands according to the way that you logged into Oracle ILOM:

   • From the CMM, type.

     -> set /Servers/Blades/Blade_n/SYS prepare_to_remove_action=true
     Set ???prepare_to_remove_action' to ???true'
     

   • From the server module, type.

     -> set /SYS prepare_to_remove_action=true
     Set ???prepare_to_remove_action' to ???true'
     

5. Confirm that the server module is in standby mode by viewing the blue Ready to Remove LED on the front of the server module.

   See Front and Rear Panel (Service) to locate this LED. If the Ready to Remove LED is on, the server module is ready for removal from the modular system chassis.

6. Remove the server module from the chassis.

   See Remove the Server Module From the Modular System.

Related Information

• Remove the Server Module From the Modular System

• Shut Down the OS and Host (Commands)

• Shut Down the OS and Host (Power Button – Graceful)

• Shut Down the OS and Host (Emergency Shutdown)