Go to main content
Index
Numbers and Symbols
- /CH legacy targets, CLI command targetsCLI Legacy
Service State Tasks and Applicable CLI Targets
- /STORAGE legacy targets, CLI command targetsCLI Legacy
Service State Tasks and Applicable CLI Targets
- /SYS legacy targets, CLI command targetsCLI Legacy
Service State Tasks and Applicable CLI Targets
A
- active session details, CLI command targetsEvent, Audit,
and System Log Tasks and Applicable CLI Targets
- actual powerPower Consumption Properties in Oracle ILOM Interfaces
- administering
- host management configuration actionsAdministering Host Management Configuration Actions
- open problemsAdministering
Open Problems
- service actions
- Administering Removable Devices on SPARC M-Series Servers
- Administering Service Actions: Oracle Blade Chassis NEMs
- system management configuration actionsAdministering
System Management Configuration Actions
- alert rules configuration, CLI command targetsAlert Notification
Tasks and Applicable CLI Targets
- analyzing power usage statisticsAnalyzing
Power Usage Statistics
- audit logsLog Descriptions
B
- BIOS configurations (save, restore, reset), CLI command targetsx86 BIOS Back up and Restore Tasks and Applicable CLI Targets
- BIOS version, CLI command targetsFirmware Update Tasks and Applicable CLI Targets
- blade power grants
- grant limitBlade Power Grants (CMM Power Allocation)
- granted powerBlade Power Grants (CMM Power Allocation)
- required powerBlade Power Grants (CMM Power Allocation)
- blade slot power summary
- grantable powerBlade Slot Power Summary (CMM Power Allocation)
- unfilled grant requestsBlade Slot Power Summary (CMM Power Allocation)
- boot device selection, CLI command targetsHost Management Tasks and Applicable CLI Targets
C
- chassis component property, allocated powerChassis Component Properties (CMM only)
- chassis viewWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- clearing
- faultsClearing
Faults for Repairs or Replacements
- faults for undetected componentsClear Faults for Undetected
Replaced or Repaired Hardware Components
- log entries (CLI)View and Clear Log Entries (CLI)
- log entries (web)View and Clear Log Entries (Web)
- CLI
- logging inLog In to the Oracle ILOM CLI
- target namespaceOracle ILOM 3.2.x CLI Namespace Targets on ManagedDevice
- CLI command targets
- alert rulesAlert Notification
Tasks and Applicable CLI Targets
- backward compatibility with earlier Oracle ILOM versionsShow or Hide Oracle ILOM Legacy Targets
- boot device selectionHost Management Tasks and Applicable CLI Targets
- chassis storage SAS zoningSAS Blade Zoning Management and Applicable CLI Targets
- configuring Oracle ILOM accessNetwork
Deployment Tasks and Applicable CLI Targets
- default Oracle ILOM 3.2.x targetsCLI Hierarchy for Oracle ILOM 3.2.x Targets
- domain boot deviceHost Management Tasks and Applicable CLI Targets
- fault management shellFault Management
Shell Session Task and Applicable CLI Target
- http/https accessNetwork
Deployment Tasks and Applicable CLI Targets
- KVMS configurationRemote KVMS
Service State Tasks and Applicable CLI Target
- legacy targetsCLI Legacy
Service State Tasks and Applicable CLI Targets
- listing target properties and commandsNavigating to Targets and Listing Their Properties and Supported Commands
- managing logsEvent, Audit,
and System Log Tasks and Applicable CLI Targets
- mapping tasks to targetsCLI Reference for Mapping Management Tasks to CLI Targets
- navigating the target namespaceNavigating the Command-Line Interface (CLI) Namespace Targets
- NEM service actionsNEM Service Action Tasks and Applicable CLI Targets
- network port configurationManagement
Connection Tasks and Applicable CLI Targets
- physical presence settingFirmware Back Up and Restore Tasks and Applicable CLI Targets
- power consumption alert rulesAlert Notification
Tasks and Applicable CLI Targets
- power on/offHost Management Tasks and Applicable CLI Targets
- remote serial console configurationHost Serial
Console Session Tasks and Applicable CLI Target
- restart policy settingHost Management Tasks and Applicable CLI Targets
- save, restore, reset BIOS configurationsx86 BIOS Back up and Restore Tasks and Applicable CLI Targets
- save, restore, reset ILOM configurationsFirmware Back Up and Restore Tasks and Applicable CLI Targets
- serial port configurationManagement
Connection Tasks and Applicable CLI Targets
- service processor resetHost Management Tasks and Applicable CLI Targets
- showing targets and propertiesNavigating to Targets and Listing Their Properties and Supported Commands
- single sign onNetwork
Deployment Tasks and Applicable CLI Targets
- SMTP server configurationAlert Notification
Tasks and Applicable CLI Targets
- SPARC diagnostics configurationHost Diagnostic
Tasks and Applicable CLI Targets
- SSH accessNetwork
Deployment Tasks and Applicable CLI Targets
- Syslog configurationEvent, Audit,
and System Log Tasks and Applicable CLI Targets
- system policy configuration
- System Power Usage Policy Tasks and Applicable CLI Targets
- System Power-On
Policy Tasks and Applicable CLI Targets
- system resetHost Management Tasks and Applicable CLI Targets
- target namespace overviewOracle ILOM 3.2.x CLI Namespace Targets on ManagedDevice
- unhiding legacy targetsShow or Hide Oracle ILOM Legacy Targets
- updating firmwareFirmware Update Tasks and Applicable CLI Targets
- USB internal port configurationManagement
Connection Tasks and Applicable CLI Targets
- user accountsUser Management
Tasks and Applicable CLI Targets
- user authentication using a remote serverUser Management
Tasks and Applicable CLI Targets
- viewing /SYS, /STORAGE, /CHCLI Legacy
Service State Tasks and Applicable CLI Targets
- viewing active session detailsEvent, Audit,
and System Log Tasks and Applicable CLI Targets
- viewing BIOS versionFirmware Update Tasks and Applicable CLI Targets
- viewing firmware versionFirmware Update Tasks and Applicable CLI Targets
- viewing sessionsNetwork
Deployment Tasks and Applicable CLI Targets
- viewing system and component statusSystem Health
Status Tasks and Applicable CLI Targets
- x86 diagnostics configurationHost Diagnostic
Tasks and Applicable CLI Targets
- zoning passwordSAS Blade Zoning Management and Applicable CLI Targets
- CLI commands
- executing commands requiring confirmationExecuting
Commands That Require Confirmation
- executing individuallyExecuting
Commands to Change Target Properties
- CLI target types
- /CHOracle ILOM 3.2.x CLI Namespace Targets on ManagedDevice
- /CMMOracle ILOM 3.2.x CLI Namespace Targets on ManagedDevice
- /HOSTOracle ILOM 3.2.x CLI Namespace Targets on ManagedDevice
- /ServersOracle ILOM 3.2.x CLI Namespace Targets on ManagedDevice
- /SPOracle ILOM 3.2.x CLI Namespace Targets on ManagedDevice
- /SYS
- Oracle ILOM 3.2.x CLI Namespace Targets on ManagedDevice
- Oracle ILOM 3.2.x CLI Namespace Targets on ManagedDevice
- Oracle ILOM 3.2.x CLI Namespace Targets on ManagedDevice
- /SystemOracle ILOM 3.2.x CLI Namespace Targets on ManagedDevice
- CLI target types /FMMOracle ILOM 3.2.x CLI Namespace Targets on ManagedDevice
- CMM
- blade server supportCMM Web Interface: Blade Server Views
- power allocation considerationsCMM Power Allocated Components
- collecting
- information and statusViewing System Component Inventory and Health Status
- system informationViewing System Inventory, Health, and Performing Service and Management Actions
- command-line interface
- capabilitiesSupported
Management Interfaces
- cd commandBasic CLI
Commands and Options
- create commandBasic CLI
Commands and Options
- delete commandBasic CLI
Commands and Options
- dump commandBasic CLI
Commands and Options
- executing single or combined commandsCLI Reference for Executing Commands to Change Properties
- exit commandBasic CLI
Commands and Options
- help commandBasic CLI
Commands and Options
- load commandBasic CLI
Commands and Options
- logging inLog In to the Oracle ILOM CLI
- navigatingNavigating the Command-Line Interface (CLI) Namespace Targets
- newOracle ILOM Features and Functionality
- overviewAbout the Command-Line Interface (CLI)
- reset commandBasic CLI
Commands and Options
- set commandBasic CLI
Commands and Options
- show commandBasic CLI
Commands and Options
- start commandBasic CLI
Commands and Options
- stop commandBasic CLI
Commands and Options
- supported commands and optionsCLI Reference for Supported DMTF Syntax, Command Verbs, and Options
- system management using the CLICLI Reference for Mapping Management Tasks to CLI Targets
- target treetarget
- usingUsing the Command-Line Interface
- using the show and help commandsNavigating to Targets and Listing Their Properties and Supported Commands
- version commandBasic CLI
Commands and Options
- compatibility with earlier Oracle ILOM versions, CLI command targetsShow or Hide Oracle ILOM Legacy Targets
- component power allocation
- CMM considerationsCMM Power Allocated Components
- server SP considerations Server SP Power Allocated Components
- component status, CLI command targetsSystem Health
Status Tasks and Applicable CLI Targets
- considerations
- CMM power allocated componentsCMM Power Allocated Components
- power allocations monitoringPower Allocations Monitoring Considerations
- server SP power allocated components Server SP Power Allocated Components
- console, redirecting host serial, CLI command targetsHost Serial
Console Session Tasks and Applicable CLI Target
- CRUFault Management
Terminology
D
- dedicated service processorOracle ILOM Features and Functionality
- diagnosing
- SPARC systems using CLI
- Enabling Diagnostics to Run at Boot on Newer SPARC Systems (M7 and T7
Servers)
- Enabling Diagnostics to Run at Boot on Legacy SPARC Servers (M6, M5, T5, and
Earlier)
- SPARC systems using web interface
- Enable Host Diagnostics to Run on Newer SPARC Systems (Web)
- Enable Host Diagnostics to Run on Legacy SPARC Servers (Web)
- diagnostics
- for SPARC systems
- Enabling Diagnostics to Run at Boot on Newer SPARC Systems (M7 and T7
Servers)
- Enabling Diagnostics to Run at Boot on Legacy SPARC Servers (M6, M5, T5, and
Earlier)
- overviewTools for Observing and Debugging System
Behavior
- running for SPARC at boot (web)
- Enable Host Diagnostics to Run on Newer SPARC Systems (CLI)
- Enable Host Diagnostics to Run on Newer SPARC Systems (Web)
- Enable Host Diagnostics to Run on Legacy SPARC Servers (CLI)
- Enable Host Diagnostics to Run on Legacy SPARC Servers (Web)
- running for x86 at boot (CLI)
- Enable PC-Check to Run at Boot (CLI)
- Enable UEFI Diagnostics to Run at Boot (CLI)
- running for x86 at boot (web)
- Enable PC-Check to Run at Boot (Web)
- Enable UEFI Diagnostics to Run at Boot (Web)
- toolsTools for Observing and Debugging System
Behavior
- diagnostics using Fault Management Shell, CLI command targetsFault Management
Shell Session Task and Applicable CLI Target
- diagnostics, CLI command targetsHost Diagnostic
Tasks and Applicable CLI Targets
- diagnostics, using the snapshot utilityTake a Snapshot of the Oracle ILOM SP State (Web)
- Distributed Management Task Force Command-Line Protocol (DMTF CLP)About the Command-Line Interface (CLI)
- domain boot device, CLI command targetsHost Management Tasks and Applicable CLI Targets
- downloadable firmware updatesOracle ILOM Features and Functionality
E
- ENTITY-MIBSupported
Management Interfaces
- Error and fault managementOracle ILOM Features and Functionality
- error logsLog File
Display Commands and Log Descriptions
- Ethernet port, CLI command targetsManagement
Connection Tasks and Applicable CLI Targets
- event logsLog Descriptions
- event notification thresholdsPower Consumption Properties in Oracle ILOM Interfaces
F
- fault logsLog File
Display Commands and Log Descriptions
- Fault Management ShellOracle ILOM Fault
Management Shell
- commandsUsing fmstat to
View the Fault Management Statistics Report
- launchingLaunch a Fault Management Shell
Session (CLI)
- starting, stopping, and logging sessionsLaunch a Fault Management Shell
Session (CLI)
- fault management statistics reportView the Fault Management Statistics
Report (fmstat)
- fault management, CLI command targetsFault Management
Shell Session Task and Applicable CLI Target
- Fault ManagerProtecting Against Hardware Faults: Oracle ILOM Fault Manager
- faulted stateOpen Problems
Terminology
- faults
- clearingFault Events Cleared: Repaired Hardware
- clearing for repair or replacementClearing
Faults for Repairs or Replacements
- clearing for undetected componentsClear Faults for Undetected
Replaced or Repaired Hardware Components
- correctingHardware Fault Corrective Action
- definedFault Management
Terminology
- diagnosis enginesFault Management
Terminology
- Fault ManagerProtecting Against Hardware Faults: Oracle ILOM Fault Manager
- hardware notificationsHardware Fault Notifications
- health statesFault Management
Terminology
- managing through the Fault Management ShellManaging Oracle Hardware Faults Through the Oracle ILOM Fault Management
Shell
- proactive self-healingFault Management
Terminology
- protecting againstProtecting Against Hardware Faults: Oracle ILOM Fault Manager
- terminologyFault Management
Terminology
- viewing fault management log filesView Fault Management Log Files
(fmdump)
- viewing faulty componentsView Information About Active
Faulty Components (fmadm faulty)
- features and functionalityOracle ILOM
Features and Functionality
- firmware
- updateAbout Oracle Enterprise Manager Ops Center
- updating on a device (web)Update the Device Firmware From
the Actions Panel (Web)
- firmware version, CLI command targetsFirmware Update Tasks and Applicable CLI Targets
- fmadm
- command usage and syntaxfmadm Command
Usage and Syntax
- utilityUsing fmadm to
Administer Active Oracle Hardware Faults
- fmstat reports
- examplefmstat Report
Example and Description
- propertiesfmstat Report
Property Descriptions
- FRUFault Management
Terminology
G
- generating an x86 processor interruptGenerating
x86 Processor Interrupt: Debugging System Status
- getting startedGetting Started With Oracle ILOM 3.2.x
H
- hardware and FRU inventoryOracle ILOM Features and Functionality
- hardware faults
- corrective actionHardware Fault Corrective Action
- notificationsHardware Fault Notifications
- health state definitionsHealth State:
Definitions
- health statesFault Management
Terminology
- health status states
- not availableHealth State:
Definitions
- offlineHealth State:
Definitions
- OKHealth State:
Definitions
- service requiredHealth State:
Definitions
- host and system managementApplying Host and System Management Actions
I
- initial configurationOracle ILOM Features and Functionality
- initiating common actionsViewing System Component Inventory and Health Status
- input powerPower Consumption Terminology and Properties
- installed hardware minimumSystem Power Specification Properties (Power Allocation)
- integration with management toolsIntegration
With Other Management Tools
- Intelligent Platform Management Interface (IPMI)
- capabilitiesSupported
Management Interfaces
- interfaces to Oracle ILOMSupported
Management Interfaces
- IP addressesNetwork Requirements for Logging In
K
- KVMS configuration, CLI command targetsRemote KVMS
Service State Tasks and Applicable CLI Target
L
- launching
- Fault Management ShellLaunch a Fault Management Shell
Session (CLI)
- x86 Oracle System AssistantLaunch the x86 Oracle System
Assistant
- legacy CLI targets, unhidingShow or Hide Oracle ILOM Legacy Targets
- legacy serversCMM Web Interface: Blade Server Views
- log entries
- classLog Properties
- date and timeLog Properties
- event IDLog Properties
- filteringFilter Log Entries
- severityLog Properties
- typeLog Properties
- viewing and clearing (CLI)View and Clear Log Entries (CLI)
- viewing and clearing (web)
- View and Clear Log Entries (CLI)
- View and Clear Log Entries (CLI)
- View and Clear Log Entries (Web)
- logging in
- CLILog In to the Oracle ILOM CLI
- network requirementsNetwork Requirements for Logging In
- logs
- auditLog Descriptions
- descriptionsLog Descriptions
- entriesLog Properties
- errorLog File
Display Commands and Log Descriptions
- eventLog Descriptions
- faultLog File
Display Commands and Log Descriptions
- syslogLog Descriptions
- time stampsLog Time Stamps
- logs, CLI command targetsEvent, Audit,
and System Log Tasks and Applicable CLI Targets
M
- maintenance overviewTools for Observing and Debugging System
Behavior
- memory web pageWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- MIBs supportedSupported
Management Interfaces
- modifying
- device locator state (web)View and Modify the Device Locator
State From the Actions Panel (Web)
- device power state (web)View and Modify the Device Power
State From the Actions Panel (Web)
- monitoring power allocationsMonitoring
Power Allocations
N
- NEM service actions, CLI command targetsNEM Service Action Tasks and Applicable CLI Targets
- NEMs
- preparing to remove (CMM CLI)Prepare to Remove or Return a NEM to Service (CMM CLI)
- preparing to remove (web)Prepare to Remove or Return a NEM to Service (Web)
- service action propertiesNEM Service Action Properties
- network addresses
- CMMNetwork Requirements for Logging In
- server SPNetwork Requirements for Logging In
- network connection issuesNetwork Connection Issues: Oracle ILOM Interfaces
- network port, CLI command targetsManagement
Connection Tasks and Applicable CLI Targets
- network requirementsNetwork Requirements for Logging In
- non-maskable interrupt (NMI)
- generating using CLIGenerate a Nonmaskable Interrupt
- overviewGenerating
x86 Processor Interrupt: Debugging System Status
- notification thresholdPower Consumption Properties in Oracle ILOM Interfaces
- notifications
- of hardware faultsHardware Fault Notifications
O
- obtaining
- network addressesNetwork Requirements for Logging In
- open problemsOpen Problems
Terminology
- administeringAdministering
Open Problems
- terminologyOpen Problems
Terminology
- viewingView Open Problems Detected
on a Managed Device
- Oracle Enterprise Ops CenterAbout Oracle Enterprise Manager Ops Center
- Oracle ILOM
- Fault ManagerProtecting Against Hardware Faults: Oracle ILOM Fault Manager
- overviewAbout Oracle ILOM
- Oracle ILOM Service Snapshot utilityTaking a Snapshot: Oracle ILOM SP State
- Oracle Integrated Lights Out Manager (ILOM)
- configurations (save, restore, reset), CLI command targetsFirmware Back Up and Restore Tasks and Applicable CLI Targets
- Fault Management ShellOpen Problems
Terminology
- features and functionalityOracle ILOM
Features and Functionality
- getting startedGetting Started With Oracle ILOM 3.2.x
- integrating with other management toolsIntegration
With Other Management Tools
- interfaces toSupported
Management Interfaces
- log descriptionsLog Descriptions
- log entriesLog Properties
- log time stampsLog Time Stamps
- logging in to the CLILog In to the Oracle ILOM CLI
- managing log entriesManaging
Oracle ILOM Log Entries
- overviewAbout Oracle ILOM
- performing common management actions (web)Performing Common System Management Actions
- service processor
- embedded operating systemAbout Oracle ILOM
- user interfaces supported
- Supported
Management Interfaces
- About Oracle ILOM
- out-of-band managementAbout Oracle ILOM
- output powerPower Consumption Terminology and Properties
- overview
- clearing faultsFault Events Cleared: Repaired Hardware
- Fault ManagerProtecting Against Hardware Faults: Oracle ILOM Fault Manager
- firmware updatesTools for Observing and Debugging System
Behavior
- hardware fault notificationsHardware Fault Notifications
- Oracle Enterprise Ops CenterAbout Oracle Enterprise Manager Ops Center
- Oracle ILOMAbout Oracle ILOM
- Oracle ILOM configuration backup, restore and resetTools for Observing and Debugging System
Behavior
- Oracle ILOM Service Snapshot utilityTaking a Snapshot: Oracle ILOM SP State
- power history graphs and metricsPower History
Graphs and Metrics
- x86 and SPARC diagnostic toolsTools for Observing and Debugging System
Behavior
P
- Pc-Check diagnostics for x86 systems
- configuring (CLI)
- Enable PC-Check to Run at Boot (CLI)
- Enable UEFI Diagnostics to Run at Boot (CLI)
- peak permittedPower Consumption Properties in Oracle ILOM Interfaces
- per component power map
- allocated powerPer Component Power Map Properties (SP Power Allocation)
- can be capped propertyPer Component Power Map Properties (SP Power Allocation)
- propertiesPer Component Power Map Properties (SP Power Allocation)
- physical network management connectionsNetwork Requirements for Logging In
- power allocation planMonitoring
Power Allocations
- viewingView the Power Allocation Plan
for a Managed Device
- power allocations monitoring considerationsPower Allocations Monitoring Considerations
- power consumptionPower Consumption Terminology and Properties
- actual powerPower Consumption Properties in Oracle ILOM Interfaces
- blade serverPower Consumption Terminology and Properties
- CMMPower Consumption Terminology and Properties
- notification thresholdPower Consumption Properties in Oracle ILOM Interfaces
- peak permittedPower Consumption Properties in Oracle ILOM Interfaces
- rackmount serverPower Consumption Terminology and Properties
- target limitPower Consumption Properties in Oracle ILOM Interfaces
- viewingMonitoring Power Consumption
- power consumption alert configuration, CLI command targetsAlert Notification
Tasks and Applicable CLI Targets
- power consumption propertiesView Power Consumption Properties for a Managed Device
- power history
- aboutPower History
Graphs and Metrics
- about graphs and metricsPower History
Graphs and Metrics
- overviewPower History
Graphs and Metrics
- viewing graphs and metricsView Power History Graphs and
Metrics
- power history graphs and metricsPower History
Graphs and Metrics
- power monitoring considerationsPower Consumption Properties in Oracle ILOM Interfaces
- power on/off, CLI command targetsHost Management Tasks and Applicable CLI Targets
- power statistics
- aboutRolling Average
Power Statistics Graphs and Metrics
- analyzingAnalyzing
Power Usage Statistics
- overviewRolling Average
Power Statistics Graphs and Metrics
- rolling average graphs and metricsRolling Average
Power Statistics Graphs and Metrics
- viewing graphs and metricsView Power Statistics Bar Graphs
and Metrics
- power supply maximumSystem Power Specification Properties (Power Allocation)
- preparing to remove
- NEM to service (CMM CLI)Prepare to Remove or Return a NEM to Service (CMM CLI)
- NEM to service (web)Prepare to Remove or Return a NEM to Service (Web)
- preparing to return
- NEM to service (CMM CLI)Prepare to Remove or Return a NEM to Service (CMM CLI)
- NEM to service (web)Prepare to Remove or Return a NEM to Service (Web)
- proactive self-healingFault Management
Terminology
R
- real-time power monitoringPower Consumption Terminology and Properties
- proceduresReal-Time Power Monitoring Through Oracle ILOM Interfaces
- redundant powerSystem Power Specification Properties (Power Allocation)
- remote accessOracle ILOM Features and Functionality
- remote hardware monitoringOracle ILOM Features and Functionality
- remotely control service processorAbout Oracle Enterprise Manager Ops Center
- removing components
- CLIManage M-Series Server Removable Devices
- WebManage M-Series Server Removable Devices
- restart policy, CLI command targetsHost Management Tasks and Applicable CLI Targets
- returning components to service
- CLIManage M-Series Server Removable Devices
- WebManage M-Series Server Removable Devices
- running
- SPARC diagnostics at boot (web)
- Enable Host Diagnostics to Run on Newer SPARC Systems (CLI)
- Enable Host Diagnostics to Run on Newer SPARC Systems (Web)
- Enable Host Diagnostics to Run on Legacy SPARC Servers (CLI)
- Enable Host Diagnostics to Run on Legacy SPARC Servers (Web)
- x86 diagnostics at boot (CLI)
- Enable PC-Check to Run at Boot (CLI)
- Enable UEFI Diagnostics to Run at Boot (CLI)
- x86 diagnostics at boot (web)
- Enable PC-Check to Run at Boot (Web)
- Enable UEFI Diagnostics to Run at Boot (Web)
- running diagnostics toolsEnabling
and Running Oracle ILOM Diagnostic Tools
S
- serial port, CLI command targetsManagement
Connection Tasks and Applicable CLI Targets
- server SP
- power allocation considerations Server SP Power Allocated Components
- service actions
- administering
- Administering Removable Devices on SPARC M-Series Servers
- Administering Service Actions: Oracle Blade Chassis NEMs
- NEM propertiesNEM Service Action Properties
- Service Processor (SP)
- collecting and diagnosingTake a Snapshot of the Oracle ILOM SP State (Web)
- service processor reset, CLI command targetsHost Management Tasks and Applicable CLI Targets
- Simple Network Management Protocol (SNMP)
- capabilities
- Supported
Management Interfaces
- Supported
Management Interfaces
- Supported
Management Interfaces
- single sign on, CLI command targetsNetwork
Deployment Tasks and Applicable CLI Targets
- SMTP server configuration, CLI command targetsAlert Notification
Tasks and Applicable CLI Targets
- snapshot
- of Oracle ILOM SP state (CLI)Take a Snapshot of the Oracle ILOM SP State (CLI)
- of Oracle ILOM SP state (web)Take a Snapshot of the Oracle ILOM SP State (Web)
- utilityTaking a Snapshot: Oracle ILOM SP State
- snapshot utility, using (web)
- Take a Snapshot of the Oracle ILOM SP State (CLI)
- Take a Snapshot of the Oracle ILOM SP State (Web)
- SNMP-FRAMEWORK-MIBSupported
Management Interfaces
- SNMP-MPD-MIBSupported
Management Interfaces
- SNMPv2-MIBSupported
Management Interfaces
- SPARC diagnostics
- configuring (web interface)
- Enable Host Diagnostics to Run on Newer SPARC Systems (Web)
- Enable Host Diagnostics to Run on Legacy SPARC Servers (Web)
- SSH access, CLI command targetsNetwork
Deployment Tasks and Applicable CLI Targets
- storage zoning (chassis), CLI command targetsSAS Blade Zoning Management and Applicable CLI Targets
- Sun managed deviceFault Management
Terminology
- Sun xVM Ops Center
- using with ILOMIntegration
With Other Management Tools
- SUN-HW-TRAP-MIBSupported
Management Interfaces
- SUN-ILOM-CONTROL-MIBSupported
Management Interfaces
- SUN-ILOM-PET-MIBSupported
Management Interfaces
- SUN-PLATFORM-MIBSupported
Management Interfaces
- supported
- CMM blade serversCMM Web Interface: Blade Server Views
- IP addressesNetwork Requirements for Logging In
- management interfacesSupported
Management Interfaces
- management toolsIntegration
With Other Management Tools
- MIBsSupported
Management Interfaces
- Oracle ILOM features and functionalityOracle ILOM
Features and Functionality
- Syslog configuration, CLI command targetsEvent, Audit,
and System Log Tasks and Applicable CLI Targets
- syslogsLog Descriptions
- system alertsOracle ILOM Features and Functionality
- system information
- navigation optionsWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- system policy, CLI command targets
- System Power Usage Policy Tasks and Applicable CLI Targets
- System Power-On
Policy Tasks and Applicable CLI Targets
- system power control and monitoringOracle ILOM Features and Functionality
- system power specification
- allocated powerSystem Power Specification Properties (Power Allocation)
- installed hardware minimumSystem Power Specification Properties (Power Allocation)
- peak permittedSystem Power Specification Properties (Power Allocation)
- power supply maximumSystem Power Specification Properties (Power Allocation)
- propertiesSystem Power Specification Properties (Power Allocation)
- redundant powerSystem Power Specification Properties (Power Allocation)
- target limitSystem Power Specification Properties (Power Allocation)
- system reset, CLI command targetsHost Management Tasks and Applicable CLI Targets
- system status, CLI command targetsSystem Health
Status Tasks and Applicable CLI Targets
T
- taking a snapshot (CLI)Take a Snapshot of the Oracle ILOM SP State (CLI)
- taking a snapshot (web)Take a Snapshot of the Oracle ILOM SP State (Web)
- target limitPower Consumption Properties in Oracle ILOM Interfaces
- target namespaceOracle ILOM 3.2.x CLI Namespace Targets on ManagedDevice
- terminology
- fault managementFault Management
Terminology
- third-party management toolsIntegration
With Other Management Tools
- tools for diagnosticsTools for Observing and Debugging System
Behavior
- TPM configuration, CLI command targetsHost Management Tasks and Applicable CLI Targets
- troubleshooting
- network connectionin isssuesNetwork Connection Issues: Oracle ILOM Interfaces
- Oracle ILOM managed devicesTroubleshooting Oracle ILOM Managed Devices
- troubleshooting using the Snapshot utilityTake a Snapshot of the Oracle ILOM SP State (Web)
U
- updates and configuration changesAbout Oracle Enterprise Manager Ops Center
- updating
- device firmware (web)Update the Device Firmware From
the Actions Panel (Web)
- updating firmware, CLI command targetsFirmware Update Tasks and Applicable CLI Targets
- USB internal Ethernet port, CLI command targetsManagement
Connection Tasks and Applicable CLI Targets
- user accounts
- configuringOracle ILOM Features and Functionality
- user accounts, CLI command targetsUser Management
Tasks and Applicable CLI Targets
- user authentication, CLI command targetsUser Management
Tasks and Applicable CLI Targets
- user session timeout, CLI command targetsNetwork
Deployment Tasks and Applicable CLI Targets
- UUIDFault Management
Terminology
V
- viewing
- active faulty componentsView Information About Active
Faulty Components (fmadm faulty)
- device locator state (web)View and Modify the Device Locator
State From the Actions Panel (Web)
- device power state (web)View and Modify the Device Power
State From the Actions Panel (Web)
- fault management log filesView Fault Management Log Files
(fmdump)
- fault management statistics reportView the Fault Management Statistics
Report (fmstat)
- health status (web)View System-Level Information and Health Status (Web)
- log entries (web)View and Clear Log Entries (Web)
- open problemsView Open Problems Detected
on a Managed Device
- power allocation plansView the Power Allocation Plan
for a Managed Device
- power consumptionMonitoring Power Consumption
- power consumption propertiesView Power Consumption Properties for a Managed Device
- power history graphs and metricsView Power History Graphs and
Metrics
- power statistics graphs and metricsView Power Statistics Bar Graphs
and Metrics
- subcomponent-level information (CLI)View Subcomponent-Level Information
and Health Status (CLI)
- subcomponent-level information (web)View Subcomponent-Level Information
and Health Status (Web)
- system-level information (web)View System-Level Information and Health Status (Web)
W
- web access, CLI command targetsNetwork
Deployment Tasks and Applicable CLI Targets
- web browsersSupported
Operating System Web Browsers
- web interface
- capabilitiesSupported
Management Interfaces
- CMM blade server viewsCMM Web Interface: Blade Server Views
- navigatingNavigating the Web Interface
- navigation optionsWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- newOracle ILOM Features and Functionality
- supported browsersSupported
Operating System Web Browsers
- web navigation optionsWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- web pages
- active directoryWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- active sessionsWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- alertsWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- allocationWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- audit logsWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- backup/restoreWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- banner messagesWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- BIOSWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- bladesWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- chassis viewWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- CLIWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- clockWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- consumptionWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- coolingWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- diagnosticsWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- DNSWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- event logsWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- firmware
- Web Interface Navigation Options for Devices Managed by Oracle ILOM
- Web Interface Navigation Options for Devices Managed by Oracle ILOM
- historyWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- host controlWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- host managementWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- I/O modulesWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- identificationWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- IPMIWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- KVMSWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- LDAPWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- LDAP/SSLWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- limitWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- networkWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- networkingWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- open problemsWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- Oracle ILOM administrationWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- PCI devicesWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- policyWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- powerWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- power controlWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- power managementWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- processorsWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- RADIUSWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- redirectionWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- redundancyWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- reset componentsWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- reset defaultsWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- SAS zoningWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- serial portWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- settingsWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- SMTP clientWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- snapshotWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- SNMPWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- SSH serverWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- SSL certificateWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- statisticsWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- storageWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- summaryWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- syslogWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- system informationWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- system managementWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- timezoneWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- user accountsWeb Interface Navigation Options for Devices Managed by Oracle ILOM
- web serverWeb Interface Navigation Options for Devices Managed by Oracle ILOM
X
- x86 systems diagnostics
- configuring (CLI)
- Enable PC-Check to Run at Boot (CLI)
- Enable UEFI Diagnostics to Run at Boot (CLI)
Z
- zoning (chassis), CLI command targetsSAS Blade Zoning Management and Applicable CLI Targets