Go to main content

Oracle® ILOM User's Guide for System Monitoring and Diagnostics Firmware Release 3.2.x

Exit Print View

Updated: April 2018
 
 

View Subcomponent-Level Information and Health Status (Web)

The subcomponent-level health status properties for a host server or CMM are viewable from the Summary page in the web interface.

Before You Begin:

  • To view health and inventory status properties on the Networking page for Infiniband network controllers, the installation of the Oracle Hardware Management Pack (HMP) software, version 2.3 or later, is required.

  • To view the majority of the health and inventory status properties on the Storage page, the installation of the HMP software, version 2.2 or later, is required. In addition, to view the controller Type property or the controller Details properties (such as, Location; World Wide Name (WWN) for FC Controllers; and, Number Of Ports), the installation of HMP software, version 2.3 or later, is required.

  1. To view subcomponent-level health status properties, click System Information > subcomponent-category-name.

    For example:

    • An SP navigation pane shows a list of subcomponents such as Processors, Memory, Power, Cooling, Storage, and so on.

      To view server SP subcomponent-level health status details for Processors, click System Information > Processors.

    • A CMM navigation pane shows subcomponents such as Blades, Power, Cooling, Storage, and I/O Modules.

      To view the CMM subcomponent-level heath status details for I/O Modules, click System Information > I/O Modules.

    • A Domain navigation pane shows subcomponents such as DCUs, Processors, Memory, Power, Cooling, Storage, Networking, PCI Devices, and Firmware.

      To view subcomponent-level health status details for domain-specific DCUs, click System Information > DCUs.


      Note - Domain navigation panes are available for Oracle's multi-domain SPARC systems.
  2. On the subcomponent category page, you can:
    • Determine the overall health for the subcomponent category and the number of subcomponents installed for each category.

    • Determine the health details and the installed location for each subcomponent currently installed on the managed device.

    On some servers, you can also enable and disable subcomponents from the subcomponent category page. For further information about enabling or disabling subcomponents on your Oracle server, refer to the documentation supplied with the server.

    • View further information about the installed subcomponent by clicking the Details link in the table.


      Note -  In the DIMM Details page, as of Oracle ILOM 3.1.2, the following format will be used to describe the value for the DIMM Part Number = Oracle_part number, vendor_part_number. For example: 5111616-01,M393B5270DH0-YK0; where: 5111616-01 is the Oracle part number and M393B5270DH0-YK0 is the vendor part number.

Related Information