View System-Level Information
and Health Status (CLI)
The host system-level health status CLI properties
are viewable at the /System target.
Note -
Alternatively, you can issue the CLI legacy
/SYS target
in place of the
/System target if the managed device
previously supported ILOM 3.0.x. If the managed device did not previously
support a version of Oracle ILOM 3.0, the legacy
/SYS
target, in Oracle ILOM 3.2.
x, is disabled by
default. To enable the CLI legacy
/SYS target, see
Show or Hide Oracle
ILOM Legacy Targets.
- To
collect system-level information or to verify the system health
status, type:
show /System
For example:
Properties:
health = OK
health_details = -
open_problems_count = 0
power_state = On
locator_indicator = Off
model = SUN FIRE X4270 M3
type = Rack Mount
part_number = 07011205
serial_number = 0328MSL-1119T4002F
system_identifier = (none)
system_fw_version = ILOM: 3.2.1.0
primary_operating_system = Not Available
host_primary_mac_address = Not Available
ilom_address = 10.123.45.255
ilom_mac_address = 00:12:34:D5:F2:F6
actual_power_consumption = 123 watts
action = (none)
Note - The property value for the primary operating system
installed on the managed device is shown only when the Oracle ILOM
Hardware Management Pack is installed on the managed device.