JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Oracle ZFS Storage ZS3-ES

Installation Guide
Oracle Technology Network
Library
PDF
Print View
Feedback
search filter icon
search icon

Document Information

Using This Documentation

About This Documentation

Related Documentation

Feedback

Support and Accessibility

About the Installation Procedure

Installation Procedure Overview

About Server Features and Components

Server Components

Front Panel Status Indicators, Connectors, and Drives

Back Panel Status Indicators, Connectors, and PCIe Slots

Preparing for Server Installation

Shipping Inventory

Tools and Equipment Needed for Installation

ESD and Safety Precautions

Installing the Server Into a Rack

Installation Prerequisites

Rack Requirements

Safety Precautions When Rackmounting the Server

Rackmount Kit Contents

Stabilize the Rack for Installation

Install Mounting Brackets

Mark the Rackmount Location

Attach Tool-less Slide-Rail Assemblies

Install the Server Into the Slide-Rail Assemblies

Install the Cable Management Arm

Remove the Cable Management Arm

Verify Operation of Slide-Rails and CMA

Install Oracle Disk Shelves

Cabling the Server

Rear Cable Connections and Ports

Ethernet Ports

Connect Data Cables to the Server

Connect the Cluster Cables

Connect to Oracle DE2 Disk Shelves

Powering On and Initially Configuring the Server

Prerequisites

Clustering Guidelines

Power on the Oracle Disk Shelves and Servers

Configure the Primary Network Interface

Initial Configuration

Troubleshooting Installation Issues

Connecting to Oracle ILOM

Oracle ILOM Hardware and Interfaces

Network Defaults

Logging In to Oracle ILOM Using a Local Serial Connection

Logging In to Oracle ILOM Using a Remote Ethernet Connection

Troubleshooting the Service Processor Connection

Resetting the Service Processor Using Oracle ILOM

Reset the Service Processor From the Server Back Panel

Recover Root Account Password

Powering Down the Server

Graceful Server Power Down

Emergency Server Power Down Using the Power Button

Emergency Server Power Down Using the Oracle ILOM CLI

Emergency Server Power Down Using the Oracle ILOM Web Interface

Reset the Server

Use the Oracle ILOM Command-Line Interface to Reset the Server

Use the Oracle ILOM Web Interface to Reset the Server

Installation Troubleshooting

Technical Support Information Worksheet

Locating the System Serial Number

Getting Server Firmware and Software

Firmware and Software Updates

Firmware and Software Access Options

Download Firmware and Software Using My Oracle Support

Index

Rack Requirements

The rack into which you install the Oracle ZFS Storage ZS3-ES must meet the requirements listed in the following table.

Table 2 Rack Requirements

Item
Requirement
Structure
Four-post rack (mounting at both front and rear). Supported rack types: square hole (9.5 mm) and round hole (M6 or 1/4-20 threaded only.

Two-post racks are not compatible.
Rack horizontal opening and unit vertical pitch
Conforms to ANSI/EIA 310-D-1992 or IEC 60927 standards.
Distance between front and rear mounting planes
Minimum 610 mm and maximum 915 mm (24 inches to 36 inches).
Clearance depth in front of front mounting plane
Distance to front cabinet door is at least 25.4 mm (1 inch).
Clearance depth behind front mounting plane
Distance to rear cabinet door is at least 900 mm (35.43 inches) with the cable management arm, or 800 mm (31.5 inches) without the cable management arm.
Clearance width between front and rear mounting planes
Distance between structural supports and cable troughs is at least 456 mm (18 inches).
Minimum clearance for service access
  • Clearance, front of server: 123.2 cm (48.5 inches)

  • Clearance, rear of server: 91 cm (36 inches)
Server dimensions
Depth: (not including PSU handle): 737.0 mm (29.0 inches).

Width: (not including ears): 436.5 mm (17.19 inches).

Height: 42.6 mm (1.68 inches).
Related Information
Copyright © 2013, 2014, Oracle and/or its affiliates. All rights reserved. Legal Notices
Previous Next