Unmount an NVMe Storage Drive

1. Log in to Oracle Solaris that is running on the server.
2. To find the NVMe drive slot number, type:

   # hotplug list –lc

   This command produces output similar to the following for each of the NVMe drives installed in the server:

   # hotplug list –lc
   Connection  State    Description
   Path
   ------------------------------------------------------------------ 
   pcie13      ENABLED  PCIe-Native /pci@7a,0/pci8086,2f08@3/pci111d,80b5@4

3. To prepare the NVMe drive for removal, that is, detach the device driver and power off the drive slot, type the following commands:

   # hotplug poweroff pcie13

   # hotplug list –lc

   The following output appears for the NVMe drive that has been unmounted:

   # hotplug list –lc
   Connection  State    Description
   Path
   ------------------------------------------------------------------
   pcie13      PRESENT  PCIe-Native /pci@7a,0/pci8086,2f08@3/pci111d,80b5@4

4. Verify that the OK to Remove indicator (LED) on the NVMe storage drive is lit.