Install the Shelf Rails
-
Place the left shelf rail in the marked location.
Note - The shelf rails are marked FRONT LEFT and FRONT RIGHT (as viewed from the front of the server). An up arrow indicates proper orientation. - Secure the rear shelf rail bracket at the top and bottom holes using two Torx T30 screws.
-
Secure the front of the shelf rail in the center hole using one Torx T30
screw.
- Insert a cage nut in the hole just above the top of the shelf rail bracket.
- Repeat Step 1 through Step 4 for the right shelf rail.
-
Consider your next step.
- If you are installing a CMA, see Installing the CMA (Optional).
- If you are installing the server into an equipment rack that will be shipped to another location, see Installing the Shipping Brace Assembly (Optional).
- If you are installing the server, see Installing the Server.