Go to main content

SPARC T7-4 Server Installation Guide

Exit Print View

Updated: July 2017

Install the Top Rear Shipping Braces

The top rear shipping braces are labeled TOP LFT REAR and TOP RGT REAR as viewed from the rear of the rack.

  1. Install two cage nuts into the left rear rack post above the adapter bracket.
    image:Illustration showing how to install the top rear shipping                                 braces.
  2. Position the top left shipping brace on the left rear rack post above the adapter.
  3. Insert and finger-tighten the guide pin in the appropriate hole for your server.
  4. Secure the brace with two M6 x 12-mm screws.
  5. Repeat Step 1 through Step 4 for the top right shipping brace.

Related Information