Verify the Battery

Language:

Run show /SYS/MB/V_BAT to check the status of the system battery.

In the output, the /SYS/MB/BAT status should be OK, as in the following example.

-> show /SYS/MB/BAT
    Targets:
    Properties:
        type = Battery
        ipmi_name = MB/BAT
        class = Threshold Sensor
        value = 3.140 Volts
        upper_nonrecov_threshold = N/A
        upper_critical_threshold = N/A
        upper_noncritical_threshold = N/A
        lower_noncritical_threshold = 2.704 Volts
        lower_critical_threshold = N/A
        lower_nonrecov_threshold = N/A
        alarm_status = cleared
    Commands:
        cd
        show

Verify that the value in the value column shows a voltage of 2.8V or more.

Related Information

Replace the Battery