Go to main content

SPARC T7-4 Server Service Manual

Exit Print View

» ...Documentation Home » SPARC T7-4 Server Documentation Library » SPARC T7-4 Server Service Manual » Servicing Processor Modules » Processor Module LEDs

Updated: February 2019

SPARC T7-4 Server Service Manual

Document Information

Using This Documentation

Identifying Components

Detecting and Managing Faults

Preparing for Service

Servicing Processor Modules

Server Upgrade Process

Processor Module Configuration

Processor Module LEDs

Determine Which Processor Module Is Faulty

Remove a Processor Module or Processor Filler Module

Install a Processor Module or Processor Filler Module

Verify a Processor Module

Servicing DIMMs

Servicing Hard Drives

Servicing the Main Module

Servicing NVMe Switch Cards

Servicing the Drive Backplane

Servicing the SPM

Servicing the SCC PROM

Servicing the Battery

Servicing the Front I/O Assembly

Servicing Power Supplies

Servicing Fan Modules

Servicing PCIe Cards

Servicing the Rear I/O Module

Servicing the Rear Chassis Subassembly

Returning the Server to Operation

Language:

Processor Module LEDs

image:Graphic showing the processor module LEDs.

No.	LED	Icon	Description
1	(No function.)		Not supported.
2	Service Required (amber)		Indicates that the processor module has experienced a fault condition.
3	OK (green)		Indicates if the processor module is available for use. On – The server is running and the processor module is functioning correctly. Off – The server is powered down and the processor module is in standby mode.

Related Information

Copyright © 2015, 2019, Oracle and/or its affiliates. All rights reserved.