|Skip Navigation Links|
|Exit Print View|
|Netra Blade X3-2B (formerly Sun Netra X6270 M3 Server Module) HTML Document Collection|
The Sun Netra 6000 modular system chassis has its own service processor, called a chassis monitoring module (CMM). Oracle ILOM CMM provides an Ethernet connection through the chassis to the blade service processor.
The minimum Oracle ILOM CMM firmware version corresponds to the chassis model as follows:
A90–B: CMM ILOM 188.8.131.52b (software release 3.3.3)
A90–D: CMM ILOM 3.1 (software release 4.2)
For information about how to identify the chassis, see Netra Blade X3-2B Product Notes.
Oracle ILOM CMM software allows you to monitor and manage all of the chassis components, including installed server and storage blades.
The following illustration shows an example of the web interface when you are logged in to the Oracle ILOM CMM.
The following is an example of using the CMM command-line interface (CLI) to show information about the blade when you are logged in to the Oracle ILOM CMM. In this example, the blade is installed in chassis blade slot 1.
Note - The /CH target is hidden in the CMM CLI by default. In order to see this target and its sub-targets, use the following command: /CMM/cli legacy_targets=enable
-> show /CH/BL1 /CH/BL1 Targets: HOST System SP Properties: Commands: cd show
See the system chassis documentation for more information at: