|Skip Navigation Links|
|Exit Print View|
|Netra Blade X3-2B (formerly Sun Netra X6270 M3 Server Module) HTML Document Collection|
With Oracle ILOM software, you can monitor and manage blade components, using the blade SP, including:
Configuring network information
Viewing and editing hardware configurations for the SP
Monitoring vital system information and viewing logged events
Managing Oracle ILOM user accounts
The following illustration shows an example of the web interface when you are logged in to the Oracle ILOM SP.
The following is an example of using the command-line interface (CLI) to show information available when you are logged in to the Oracle ILOM SP. It shows information about the blade and its chassis connections.
-> show /System /System Targets: Cooling Processors Memory Power Storage PCI_Devices Firmware Networking Open_Problems (1) BIOS IO_Modules SP Properties: health = Service Required health_details = /SYS (Motherboard) is faulty. Type 'show /System/Open_Problems' for details. open_problems_count = 1 power_state = Off locator_indicator = Off serial_number = 489089M-1122PR0071 model = ASSY,BLADE,SUN NETRA X6270 M3 type = Blade system_fw_version = ILOM: 22.214.171.124 BIOS: 20010900 host_primary_ip_address = (none) host_primary_mac_address = (none) system_identifier = (none) primary_operating_system = (none) actual_power_consumption = 10 watts ilom_address = 10.134.210.152 ilom_mac_address = 00:21:28:BB:D7:22 action = (none) Commands: cd reset show start stop
For detailed information, see the Oracle ILOM 3.1 documentation.