Go to main content
Oracle® SuperCluster T5-8 Owner's Guide

Exit Print View

Updated: May 2016
 
 

10-GbE Client Access Network Physical Connections (SPARC T5-8 Servers)

Each SPARC T5-8 server contains several dual-ported Sun Dual 10-GbE SFP+ PCIe 2.0 Low Profile network interface cards (NICs). The number of 10-GbE NICs and their locations in the SPARC T5-8 servers varies, depending on the configuration of Oracle SuperCluster T5-8:

  • Full Rack: Eight 10-GbE NICs, installed in these PCIe slots:

    • PCIe slot 1

    • PCIe slot 2

    • PCIe slot 5

    • PCIe slot 6

    • PCIe slot 9

    • PCIe slot 10

    • PCIe slot 13

    • PCIe slot 14

  • Half Rack: Four 10-GbE NICs, installed in these PCIe slots:

    • PCIe slot 1

    • PCIe slot 6

    • PCIe slot 9

    • PCIe slot 14

See Card Locations (SPARC T5-8 Servers) for the location of the 10-GbE NICs.

Depending on the configuration, one or two of the ports on the 10-GbE NICs (ports 0 and 1) will be connected to the client access network. In some configurations, both ports on the same 10-GbE NIC will be part of an IPMP group to provide redundancy and increased bandwidth. In other configurations, one port from two separate 10-GbE NICs will be part of an IPMP group.

The number of physical connections to the 10-GbE client access network varies, depending on the type of domains created on each SPARC T5-8 server. For more information, see Understanding the Software Configurations.